Missed day 1 of Advent Calendar.

This forum is for general discussion regarding VCarve Pro
Lameiii
Vectric Craftsman
Posts: 194
Joined: Thu Dec 16, 2010 5:50 pm
Model of CNC Machine: Romaxx WD1
Location: Dupo, IL

Missed day 1 of Advent Calendar.

Post by Lameiii »

I missed day 1 of the advent calendar as I was out of town.
Would anyone mind sharing this file with me?

Jim
lameiii@yahoo.com

sailfl
Vectric Wizard
Posts: 377
Joined: Sat Dec 15, 2007 3:46 pm
Model of CNC Machine: MechMate
Location: Orlando, FL

Re: Missed day 1 of Advent Calendar.

Post by sailfl »

I thought they said the first 5 days would be open for 5 days. Go to the calendar and you can go back and pick the first day.

User avatar
ChrisInEstes
Vectric Wizard
Posts: 841
Joined: Fri Jul 17, 2009 8:00 pm
Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
Location: Estes Park, Colorado, USA

Re: Missed day 1 of Advent Calendar.

Post by ChrisInEstes »

Yup, you can get December 1st's still. It's the tree next to December 2nd. For some reason, I had to click December 2 to get the 'door' open, then I was able to get yesterday's tree.
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle

Bob Reda
Vectric Wizard
Posts: 862
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: Missed day 1 of Advent Calendar.

Post by Bob Reda »

Hey Wolfie,

Since you are a day ahead of us here in the US, we appoint you to let us know what the next day art is :mrgreen: you do get it a day before we do.

Bob

User avatar
Ms Wolffie
Vectric Wizard
Posts: 2695
Joined: Sat Mar 31, 2012 10:41 pm
Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
Location: Tully Heads, Wet Tropics, Queensland, Australia

Re: Missed day 1 of Advent Calendar.

Post by Ms Wolffie »

Bob Reda wrote:Hey Wolfie,

Since you are a day ahead of us here in the US, we appoint you to let us know what the next day art is :mrgreen: you do get it a day before we do.

Bob
Day 1
I mucked around with it and added some decorations
WinterTree.png
Day 2
Day 2.png
Day 3
Day3.png
Cheers
Wolffie
Cheers
Wolffie

Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6

User avatar
Leo
Vectric Wizard
Posts: 4091
Joined: Sat Jul 14, 2007 3:02 am
Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
Location: East Freetown, Ma.
Contact:

Re: Missed day 1 of Advent Calendar.

Post by Leo »

Hey - that is cool --- I can know today what is going to happen tomorrow.

Can you do that with the stock exchange also?
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC

sailfl
Vectric Wizard
Posts: 377
Joined: Sat Dec 15, 2007 3:46 pm
Model of CNC Machine: MechMate
Location: Orlando, FL

Re: Missed day 1 of Advent Calendar.

Post by sailfl »

Hey, don't be posting the pictures early for us in the USA. It is Christmas, I want to be surprised and thrilled like a kid!

woodwurker
Vectric Craftsman
Posts: 149
Joined: Sun Oct 18, 2009 1:46 am
Model of CNC Machine: Blurry Customs Ironman 24x36
Location: Illinois, USA

Re: Missed day 1 of Advent Calendar.

Post by woodwurker »

Hi everyone,,,,,I like to think that I am pretty computer literate....but the downloading of the pictures is giving me fits. I click on the images...the images flash and the "press here to download" buttom pops up....but I cannot for the life of me get them to download.

Any suggestions?

Thank you in advance,

Mike
J&M Carving Creations
Vectric VcarvePro 7.0 and PhotoVcarve

PaulRowntree
Vectric Wizard
Posts: 1687
Joined: Sun Oct 24, 2010 7:28 pm
Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)
Location: Guelph, Ontario
Contact:

Re: Missed day 1 of Advent Calendar.

Post by PaulRowntree »

Don't click on the image on the right side ... click on the words "Click here".
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com

User avatar
StuartH
Vectric Craftsman
Posts: 135
Joined: Mon Sep 27, 2010 3:14 pm
Location: Redditch U.K.
Contact:

Re: Missed day 1 of Advent Calendar.

Post by StuartH »

Bob Reda wrote:Hey Wolfie,
Since you are a day ahead of us here in the US, we appoint you to let us know what the next day art is :mrgreen: you do get it a day before we do.
Bob
Hi Bob,

The vector art is available to everybody at the same time. A calendar day runs
from 00:00 - 23:59 GMT (Greenwich Mean Time) - we've put a live clock on
the calendar page which is hopefully of some help.
woodwurker wrote:Hi everyone,,,,,I like to think that I am pretty computer literate....but the downloading of the pictures is giving me fits. I click on the images... the images flash and the "press here to download" buttom pops up....but I cannot for the life of me get them to download.

Mike
Hi Mike,

When you click the 'Download' button directly from the Advent Calendar, you
should be redirected to another web page where you can then access the file.

If you are unable to get the file on the new page , you may want to check the
pop-up settings within your browser as it could be preventing the zip file from
downloading.

All the best,
Stu
Web & Multimedia Developer
Vectric Ltd

http://about.me/vectric

User avatar
Ms Wolffie
Vectric Wizard
Posts: 2695
Joined: Sat Mar 31, 2012 10:41 pm
Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
Location: Tully Heads, Wet Tropics, Queensland, Australia

Re: Missed day 1 of Advent Calendar.

Post by Ms Wolffie »

Hi Stu
When are we going to get the login automatically button fixed?
Every time I refresh the page I have to login again.
Getting rather irritating.
Cheers
Wolffie
Cheers
Wolffie

Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6

woodwurker
Vectric Craftsman
Posts: 149
Joined: Sun Oct 18, 2009 1:46 am
Model of CNC Machine: Blurry Customs Ironman 24x36
Location: Illinois, USA

Re: Missed day 1 of Advent Calendar.

Post by woodwurker »

Hi Stu....it was indeed the pop up blocker....I had it locked down tighter than a drum. It would indeed allow for the initial file to pop up but would allow a secondary site to pop up and allow for the zip file link.

Thanks again for the reminder...I thought I had checked it already....but must have missed it.

Hope all is well on your end. Have a great evening,

Mike
J&M Carving Creations
Vectric VcarvePro 7.0 and PhotoVcarve

BDM
Vectric Craftsman
Posts: 167
Joined: Tue Jan 04, 2011 3:52 pm
Location: S.E. Michigan

Re: Missed day 1 of Advent Calendar.

Post by BDM »

StuartH wrote:
The vector art is available to everybody at the same time. A calendar day runs
from 00:00 - 23:59 GMT (Greenwich Mean Time) - we've put a live clock on
the calendar page which is hopefully of some help.

Stu
It doesn't seem to actually work that way. Since I'm in the eastern time zone, I should be able to get the new art at 7:00 p.m. (0:00 GMT) but it isn't available until midnight local time, even though your clock shows it is 5:00 a.m. GMT the next day. I know because I was finally able to stay up that long on Saturday night to be sure :-). Not a big deal since I still have 24 hours to get it, but it sure would be nice to grab that day's art at 6:55 p.m. and then five minutes later get the next one :-).

User avatar
SIBUD
Vectric Craftsman
Posts: 228
Joined: Sun Jan 06, 2013 8:32 pm
Model of CNC Machine: ShopBot 18X24 Desktop
Location: Nashville, IL

Re: Missed day 1 of Advent Calendar.

Post by SIBUD »

BDM wrote:
StuartH wrote:
The vector art is available to everybody at the same time. A calendar day runs
from 00:00 - 23:59 GMT (Greenwich Mean Time) - we've put a live clock on
the calendar page which is hopefully of some help.

Stu
It doesn't seem to actually work that way. Since I'm in the eastern time zone, I should be able to get the new art at 7:00 p.m. (0:00 GMT) but it isn't available until midnight local time, even though your clock shows it is 5:00 a.m. GMT the next day. I know because I was finally able to stay up that long on Saturday night to be sure :-). Not a big deal since I still have 24 hours to get it, but it sure would be nice to grab that day's art at 6:55 p.m. and then five minutes later get the next one :-).
Well you are right. It doesn't work that way. :oops:

And I ended up missing day 11. Can anyone tell me what it was?
Bud Meade
Nashville, IL

I don't own too many BMW motorcycles, I just have too little time.

User avatar
Adrian
Vectric Archimage
Posts: 14680
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Missed day 1 of Advent Calendar.

Post by Adrian »

It was a pencil.

Post Reply