Cut file problem

This forum is for general discussion regarding VCarve Pro
Post Reply
User avatar
Phil
Vectric Wizard
Posts: 3026
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Cut file problem

Post by Phil »

When I create a cut file Photo V-Carve inserts these commands at the beginning of the file

VD,,,1
VA,
MS,42.2,12.6
JZ,1.524000
J2,0.000000,0.000000

the VD command changes my display to MM even though I selected all inch settings when I created the file.

I am using a Shopbot - *.sbp files.

User avatar
BrianM
Vectric Staff
Posts: 1964
Joined: Mon May 16, 2005 10:15 am
Model of CNC Machine: A few ...
Location: Alcester U.K
Contact:

Post by BrianM »

Hi Phil,

Are you sure you are selecting the

"ShopBot (inch ) (*.sbp)"

post processor from the list and not the "ShopBot (mm) (*.sbp)" post?

We have a fair number of users using PhotoVCarve on ShopBots in inches any we haven't had this problem reported before.

Brian

User avatar
Phil
Vectric Wizard
Posts: 3026
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Cut file problem

Post by Phil »

You're right Tony, I figured out the problem 5 minutes after I posted the message. - thanks.

Post Reply