Clean up with smaller tool

[BC11]

Hello, I'm new to VCarve Pro. I have been using EnRoute 6 on a Multicam 5000 series router. In EnRoute when 2D cutting there is an option for a "Fine" pass, which basically allows you to use a smaller tool to clean up only areas that you are unable to hit with a larger tool. The Fine pass is really nice, because it makes cleaning up the hard to reach areas extremely quick and efficient. I have been unable to find an option for this in VCarve and I am wondering if this exists. If anybody can help it would be greatly appreciated. Thanks!

[JeffZ]

I think vectric calls it "rest machining". I believe you can access it in 3d carves and maybe some other stuff but I am pretty new to this.

[BC11]

Thanks for the reply and info. I'll look into that and let you what I come up with.

[Adrian]

The option exists on the Pocket toolpath for 2D cuts. You add more tools in the Tools list of the Pocket toolpath and it will generate a toolpath for each tool listed if there is material for it to cut.

[adze_cnc]

FixitMike has posted a number of work-arounds:

• here
• here
• and here

[BC11]

Thanks for the info and the links. This is pretty complicated for newbie, but I'm going to my best. Thanks again!