spoon carving

This forum is for general discussion regarding VCarve Pro
Post Reply
Paddyo
Posts: 4
Joined: Sat Feb 15, 2020 5:19 pm
Model of CNC Machine: Iconic /Axiom V5

spoon carving

Post by Paddyo »

78067454-C050-49ED-AA35-C9AA3E511E5B[692] - Copy (3).jpg
Image

Walnut and cherry spoons created in v carve pro. Three separate tool paths with a v carve 30, upcut and a bowl bit. Fun and easy to make.

pappybaynes
Vectric Apprentice
Posts: 93
Joined: Fri Nov 28, 2008 1:41 am
Model of CNC Machine: CAMaster Stinger
Location: New Hampshire USA

Re: spoon carving

Post by pappybaynes »

Those are awesome!

JoelWeisbrod
Posts: 26
Joined: Fri Aug 21, 2020 1:41 am
Model of CNC Machine: Shark HD120

Re: spoon carving

Post by JoelWeisbrod »

Beautiful!! Care to share any more details or even the files????

Paddyo
Posts: 4
Joined: Sat Feb 15, 2020 5:19 pm
Model of CNC Machine: Iconic /Axiom V5

Re: spoon carving

Post by Paddyo »

Sure, just heading out for a run and then ill try and figure out how to do that.

jerry carney
Vectric Craftsman
Posts: 121
Joined: Fri Mar 03, 2017 6:16 pm
Model of CNC Machine: shopbot desktop
Location: Crete Il.

Re: spoon carving

Post by jerry carney »

Very nice, please post file if you can, Thanks in advance JERRY

Paddyo
Posts: 4
Joined: Sat Feb 15, 2020 5:19 pm
Model of CNC Machine: Iconic /Axiom V5

Re: spoon carving

Post by Paddyo »

The Sweet North Short Single.crv
(608 KiB) Downloaded 104 times

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: spoon carving

Post by martin54 »

JoelWeisbrod wrote:
Sat May 28, 2022 12:30 pm
Beautiful!! Care to share any more details or even the files????
If you look through the files in your V&Co account & on the forum you should find files for some other spoons :lol: :lol: :lol:

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: spoon carving

Post by scottp55 »

Very Nice Work!!
(and thank you for the file to look at! ) :)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

Paddyo
Posts: 4
Joined: Sat Feb 15, 2020 5:19 pm
Model of CNC Machine: Iconic /Axiom V5

Re: spoon carving

Post by Paddyo »

Was that what you were expecting for a file and did it open ok?

User avatar
TomWS
Vectric Wizard
Posts: 350
Joined: Sat Mar 06, 2021 11:06 pm
Model of CNC Machine: OB Lead 1010, Mach3; OB C-Beam 1060 grbl

Re: spoon carving

Post by TomWS »

Thanks for sharing the file! This will make a nice little project for my Summer place!

Post Reply