Nesting trays... Cut2D w/3D import
Nesting trays... Cut2D w/3D import
Cut2D Gallery doesn't get enough love
A set of nesting trays made with Cut2D, using an imported VectorArt 3D model. I was happily surprised to find you could do this with Cut2D! Really opens a lot of doors if you're willing to fork over a few bucks for a model.
The finger joints weren't done on the router... used a Freud box joint blade in the tablesaw for that.
A set of nesting trays made with Cut2D, using an imported VectorArt 3D model. I was happily surprised to find you could do this with Cut2D! Really opens a lot of doors if you're willing to fork over a few bucks for a model.
The finger joints weren't done on the router... used a Freud box joint blade in the tablesaw for that.
-
- Vectric Craftsman
- Posts: 128
- Joined: Tue Feb 14, 2012 5:26 am
- Model of CNC Machine: Roland MDX-40A
- Location: Lake Barrington, IL
- Contact:
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Nesting trays... Cut2D w/3D import
NICE!
Need to do that myself.
scott
Need to do that myself.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Craftsman
- Posts: 135
- Joined: Tue Jun 05, 2012 12:45 am
- Model of CNC Machine: Zenbot 2448
- Location: Belpre Ohio
Re: Nesting trays... Cut2D w/3D import
Looks great, nice job. I like these and might do some ok them for next years gifts.
-Bill
-Bill
- hooked
- Vectric Apprentice
- Posts: 60
- Joined: Mon Oct 12, 2015 10:06 pm
- Model of CNC Machine: SCRATCH BUILT CNC ROUTER
- Location: Paradise Beach - Australia
- Contact:
Re: Nesting trays... Cut2D w/3D import
Hi Dave,
Nice work. I'm really interested in the process you used within CUT2D to generate the carving. I am building a CNC router and currently use CUT2D with a laser engraver/cutter. I thought I would have to use other software to accommodate the CNC router but looks like CUT2D will possibly do the job for me.
THANKS
daryl
Nice work. I'm really interested in the process you used within CUT2D to generate the carving. I am building a CNC router and currently use CUT2D with a laser engraver/cutter. I thought I would have to use other software to accommodate the CNC router but looks like CUT2D will possibly do the job for me.
THANKS
daryl
- JamesB
- Vectric Alumni
- Posts: 1257
- Joined: Tue May 30, 2006 1:24 pm
- Model of CNC Machine: Exel CNC SL60/90 Pro
- Location: Warwickshire, UK
Re: Nesting trays... Cut2D w/3D import
Daryl - this video specifically looks at the way Cut2D can work with an imported 3D toolpath from either Vector Art 3D Machinist or Cut 3D - http://support.vectric.com/tutorials/V8 ... th_GS.html
Thanks,
James
Thanks,
James
- hooked
- Vectric Apprentice
- Posts: 60
- Joined: Mon Oct 12, 2015 10:06 pm
- Model of CNC Machine: SCRATCH BUILT CNC ROUTER
- Location: Paradise Beach - Australia
- Contact:
Re: Nesting trays... Cut2D w/3D import
THANKS James.
Re: Nesting trays... Cut2D w/3D import
I apologize for not answering your question... I didn't notice a reply had been posted to the thread. James set you on the right path, though.hooked wrote:THANKS James.
The trays were a great hit... gave them to my daughter for Christmas. Warning, though: the ability to carve canned 3D models with Cut2D is a gateway drug. I upgraded to VCarve Desktop within days of finishing up this project.
-
- Vectric Craftsman
- Posts: 135
- Joined: Tue Jun 05, 2012 12:45 am
- Model of CNC Machine: Zenbot 2448
- Location: Belpre Ohio
Re: Nesting trays... Cut2D w/3D import
Hey Dave,
Is there a source or link for the trays pattern?
- Bill
Is there a source or link for the trays pattern?
- Bill
Re: Nesting trays... Cut2D w/3D import
Well, I'm not Dave ("davis" ) but I'll assume you meant me.subsea wrote:Hey Dave,
Is there a source or link for the trays pattern?
- Bill
I actually just worked up the pattern from scratch; it's not too complicated, just a matter of getting the dimensions correct for the size of the trays you want to produce and the thickness of the mat'l you're working with. I'll see if I can dig up the files and figure out how to post what I have, though.
-
- Vectric Craftsman
- Posts: 198
- Joined: Thu Sep 11, 2014 8:53 pm
- Model of CNC Machine: ShopBot PRT ALPHA 48"x96"
- Location: Cleveland, TN
- Contact:
Re: Nesting trays... Cut2D w/3D import
I would love to get the file, my daughter would love for me to create a set for her. If you need help of figuring out how to attach the file just ask or you can just email them to joe@joebarrow.com and I will post them for you. btw, you did a great job and they are really nice looking.
Thanks,
Joe
Thanks,
Joe
-
- Vectric Craftsman
- Posts: 135
- Joined: Tue Jun 05, 2012 12:45 am
- Model of CNC Machine: Zenbot 2448
- Location: Belpre Ohio
Re: Nesting trays... Cut2D w/3D import
Davis,
Thanks for your reply and the correction..
Have a fun day - Bill
Thanks for your reply and the correction..
Have a fun day - Bill
Re: Nesting trays... Cut2D w/3D import
Will try attaching the files...
I wouldn't cut these without reviewing the dimensions; I made some adjustments to how I cut everything along the way and although I *think* these were the latest revisions, my only guarantee that they'll work correctly as posted is that I'll refund every penny you paid for them if not
I've been meaning to go back and come up with a cleaner version of the files before I make any more trays, but haven't had a chance yet.
I also had to remove the 3D model from the file for the end of the large tray. That was purchased from VectorArt 3D, and obviously it'd be a violation of the license agreement to redistribute it with the .crv. It's number 58440 on the VA3D web site... only $15.
I don't have files for the sides or bottoms of the trays. Those were just simple rips/crosscuts and a dado to receive the bottom, which I cut on the tablesaw.
I wouldn't cut these without reviewing the dimensions; I made some adjustments to how I cut everything along the way and although I *think* these were the latest revisions, my only guarantee that they'll work correctly as posted is that I'll refund every penny you paid for them if not
I've been meaning to go back and come up with a cleaner version of the files before I make any more trays, but haven't had a chance yet.
I also had to remove the 3D model from the file for the end of the large tray. That was purchased from VectorArt 3D, and obviously it'd be a violation of the license agreement to redistribute it with the .crv. It's number 58440 on the VA3D web site... only $15.
I don't have files for the sides or bottoms of the trays. Those were just simple rips/crosscuts and a dado to receive the bottom, which I cut on the tablesaw.
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Nesting trays... Cut2D w/3D import
Thank you very much Davis!
Scott
Scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Craftsman
- Posts: 135
- Joined: Tue Jun 05, 2012 12:45 am
- Model of CNC Machine: Zenbot 2448
- Location: Belpre Ohio
Re: Nesting trays... Cut2D w/3D import
Davis,
Thank you. Now I'll have to go to work.
- Bill
Thank you. Now I'll have to go to work.
- Bill