A complete Guitar with Cud2D 1.5

The Gallery is for posting photographs and images of work machined using Cut2D
User avatar
Alex Navarro
Vectric Craftsman
Posts: 192
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

Very nice a new version of Cut2D

Here files for you make you guitar with CUT2D 1.5

http://www.nbsdesign.com.br/temp/cut2d.rar

Good fan

Alex
Attachments
Body-front1.JPG
Body-back1.JPG
Neck_Front1.JPG
Neck_Back1.JPG
Alex Navarro

GaryR6
Vectric Wizard
Posts: 389
Joined: Sat May 23, 2009 6:28 pm
Location: AZ

Re: A complete Guitar with Cud2D 1.5

Post by GaryR6 »

Thanks for your work. It should be fun, fun, fun.

User avatar
Alex Navarro
Vectric Craftsman
Posts: 192
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

GaryR6 wrote:Thanks for your work. It should be fun, fun, fun.
I hope so!!
haha

Thanks!!
Alex Navarro

jam1962
Vectric Craftsman
Posts: 179
Joined: Tue Oct 06, 2009 4:45 pm
Model of CNC Machine: Self built 36x25x7
Location: Hopewell, Ohio

Re: A complete Guitar with Cud2D 1.5

Post by jam1962 »

Thank you.
Jay Morris...

User avatar
Alex Navarro
Vectric Craftsman
Posts: 192
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

Model based on Stratocaster body and Ibanez neck.

Body with 5 mm minus of contour of the Stratocaster by Fender.
Cavity for 2 humbuker and 1 central single pickups.
Body thickness: 45mm
Tremulo cavity
Bolt on neck
25 inches of scale
12 inches of radius fingerboard
24 frets
Alex Navarro

angelkarla
Vectric Apprentice
Posts: 55
Joined: Tue May 03, 2011 8:28 am
Model of CNC Machine: home made
Location: Barmouth UK
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by angelkarla »

Hi Alex I Know its cheecky but any chance of stl file for rear neck as tooling dosent show in Aspire as its different program

Art
If all else fails read the instructions

User avatar
glenn
Vectric Wizard
Posts: 582
Joined: Wed Jul 02, 2008 11:23 pm
Model of CNC Machine: home brew 40x20
Location: McArthur, Ohio U.S.A.

Re: A complete Guitar with Cud2D 1.5

Post by glenn »

Alex,
I have to try this---looks real good!
Thanks,
Glenn

User avatar
Alex Navarro
Vectric Craftsman
Posts: 192
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

angelkarla wrote:Hi Alex I Know its cheecky but any chance of stl file for rear neck as tooling dosent show in Aspire as its different program

Art
Hi

You Aspire must be the version 3.5.
Just the STL, ok... below STL and Cut3D

http://www.3dcncguitars.com/temp/12inchradius.rar

http://www.3dcncguitars.com/temp/NECKBACK.rar

Regards
Last edited by Alex Navarro on Tue Apr 03, 2012 2:16 am, edited 1 time in total.
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 192
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

glenn wrote:Alex,
I have to try this---looks real good!
Thanks,
Glenn
:D
Alex Navarro

Gc3

Re: A complete Guitar with Cud2D 1.5

Post by Gc3 »

Thank you!!!

angelkarla
Vectric Apprentice
Posts: 55
Joined: Tue May 03, 2011 8:28 am
Model of CNC Machine: home made
Location: Barmouth UK
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by angelkarla »

Alex Many thanks for the stl downloaded ok.

My son has made a Gibson copy 24-3/4" scale but did it the hard way by hand no cnc.
I am afraid my patience is limited.

Art
If all else fails read the instructions

User avatar
Alex Navarro
Vectric Craftsman
Posts: 192
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

angelkarla wrote:Alex Many thanks for the stl downloaded ok.

My son has made a Gibson copy 24-3/4" scale but did it the hard way by hand no cnc.
I am afraid my patience is limited.

Art
Some like this?

This is a video I did about a complete guitar on Aspire with English subtitles and more than 3 hours during. I got for others softwares too like a Rhinoc,eros, VCarve or Cut2d+Cut3d...
See in my web: www.3dcncguitars.com/guitars.htm - I´m make changes in my website and soon I´ll put more classic models there!

Have you some photos of you guitar?
Any question if I can help you, write me!

Best Regards
Alex
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 192
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

Les Paul Bod

In some days I will got a complete Les Paul and PRS models.
Attachments
FromCut2D_Top1.jpg
FromCut2D_Top1.2.jpg
Alex Navarro

User avatar
glenn
Vectric Wizard
Posts: 582
Joined: Wed Jul 02, 2008 11:23 pm
Model of CNC Machine: home brew 40x20
Location: McArthur, Ohio U.S.A.

Re: A complete Guitar with Cud2D 1.5

Post by glenn »

Alex,
Wow! I can't wait to see it! :D
Glenn

User avatar
Alex Navarro
Vectric Craftsman
Posts: 192
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

The original Neck Stile

2 versions, plane and finish
Attachments
Without fingerboard
Without fingerboard
Neck_Front_plane02.jpg
Neck_back_plane01.jpg
Neck_back_plane02.jpg
Neck_back_original01.jpg
Neck_back_original04.jpg
Alex Navarro

Post Reply