Drawing shapes

Post general information and questions relating to Cut2D in this Forum.
Post Reply
TOMCO INC
Posts: 1
Joined: Fri Jul 08, 2022 4:56 pm
Model of CNC Machine: KOMO

Drawing shapes

Post by TOMCO INC »

hello all, I am just getting up and running with cut 2d pro..

what is the best way to approach copying a custom pattern that i have made on a sample panel and integrating it into Cut 2d??? to make more identical copies. the original was made by someone else so i dont have the original file..
Thanks for any suggestions. :D

NewAtThis
Vectric Craftsman
Posts: 193
Joined: Sat May 21, 2022 11:39 am
Model of CNC Machine: Stepcraft M.1000
Location: North Wiltshire, United Kindgom

Re: Drawing shapes

Post by NewAtThis »

When you say "copying a custom pattern", what exactly do you mean?

Is it a printed image, e.g. a photograph of the pattern, a scanned image, or is it part of an existing project you don't have the original design file for?

You'll need to be a bit more specific and, perhaps, post an image to give us some idea of what you're wanting to achieve.

Also, be sure it's not a copyright image/file/design/pattern as "copying" it could land you in trouble!
Be wary of taking the advice of someone who thinks he knows what he's doing, and don't listen to me!

Post Reply