Help please

Post general information and questions relating to Cut2D in this Forum.
Post Reply
Shane Heckroodt
Posts: 6
Joined: Sun May 01, 2022 8:04 am
Model of CNC Machine: homebuild

Help please

Post by Shane Heckroodt »

A very good morning to you all. I am very new to this so I would be very thankful if you can help me please

I have build a cnc machine from scratch size is 2700 x 2500 mm

My problem is when you have router a piece of work from the work piece and removed it. There is still alot of empty places on the board left. How can you adjust or have your router to start cutting on the blank without removing the board from your table. I have tried to take the router to a specific place. Then zero the x and y axis but at soon as you send your job to the machine and you start the cycle it starts at your homing position

Have a great and blessed day

User avatar
Adrian
Vectric Archimage
Posts: 14546
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Help please

Post by Adrian »


Post Reply