help with a logo
help with a logo
Good Day I am new to CNC routing and have done a couple of items now that worked out great but a friend asked if i could do a logo for him and i am having trouble with getting the writing around the center is not readable, any help would be greatful
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: help with a logo
If you post your file and a bit more detailed explanation, I'm very sure that you will get your answer from someone.
“I've learned so much from my mistakes, I'm thinking of making a few more”
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: help with a logo
Link: How do I upload files or photos to the forum?
If the file is too large to upload you can:
If the file is too large to upload you can:
- place it on a site like drive.google.com, dropbox.com, or onedrive.com
- make the file shareable
- share the link to the file here on this forum
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop