Anyone have files for drawer front they would like to share?
Thanks
Drawer Front
-
- Vectric Apprentice
- Posts: 83
- Joined: Sat Nov 22, 2014 11:32 pm
- Model of CNC Machine: CNC Shark II
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Drawer Front
Dados & layout? Or Inlays, or 3D Relief? Or??
-
- Vectric Apprentice
- Posts: 83
- Joined: Sat Nov 22, 2014 11:32 pm
- Model of CNC Machine: CNC Shark II
Re: Drawer Front
Just the drawer front, 2D or 3D relief
- SteveNelson46
- Vectric Wizard
- Posts: 2305
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Drawer Front
Here is a couple that I made for a desktop dressing mirror. Originally I had planed to use dovetails but since they are so small I decided to just cut the drawers on the machine.
https://drive.google.com/file/d/1djREU9 ... sp=sharing
https://drive.google.com/file/d/1djREU9 ... sp=sharing
Steve
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Drawer Front
Do you have Cut2D? That cannot do 3D.
- SteveNelson46
- Vectric Wizard
- Posts: 2305
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
-
- Vectric Apprentice
- Posts: 83
- Joined: Sat Nov 22, 2014 11:32 pm
- Model of CNC Machine: CNC Shark II
Re: Drawer Front
I was looking for something basic for front of some built in drawers, no carving needed. I just not that good yet with some of the tool paths, and thought if I had a basic file I could play around with it.