2020 User Group Meeting - San Diego

Post general information and questions relating to Cut2D in this Forum.
Tailmaker
Vectric Wizard
Posts: 322
Joined: Sun Jun 16, 2013 4:40 am
Model of CNC Machine: Home Built 4-axis Router
Location: Fort Collins, CO

Re: 2020 User Group Meeting - San Diego

Post by Tailmaker »

Yes, still planning to be there as well. As long as we find campgrounds along the way...

Stephanie Downing
Vectric Staff
Posts: 317
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2020 User Group Meeting - San Diego

Post by Stephanie Downing »

2020 User Group Meeting - Postponed until 10th & 11th September 2021

After a lot of consideration, we have taken the decision to postpone our upcoming User Group Meeting, which was due to be held at the Double Tree Hilton hotel in San Diego on 25th & 26th September 2020.

This decision has not been taken lightly, everyone here at Vectric has been looking forward to our User Group Meeting and is disappointed that this year, we will not get the opportunity to meet our community in person. However, the health and safety of our attendees, partners and staff is and always will be, our number one priority.

We have been working very closely with the hotel’s events team to re-arrange our event and we are thrilled to announce our User Group Meeting has been rescheduled to go ahead on the new dates - 10th and 11th September 2021 at the same Double Tree Hilton Hotel in San Diego.

For those of you who have purchased a ticket for our 2020 User Group Meeting, please don't worry. We have contacted you via email independently to let you know what to do next. If you haven't received your email please contact sales@vectric.com.

We really hope you can join us next year for an even bigger and better meeting!
400x400onlineugmlogo2.jpg
We’re not going to give up on bringing our community together this year that easily!

Although the circumstances around the world prevent international travel, we are making the most of today’s technology to bring our community together in our first ever worldwide user group meeting!

Join us from the comfort of your own home for LIVE training sessions, Q&A opportunities and more, not only from the Vectric team but also from a variety of our partner and guest speakers.

We will be hosting our online meeting throughout the 24th, 25th and 26th September 2020, giving you the chance to meet people from all over the world, share tips and advice and see how they are using the software.

All the included project files, 3D clipart, gadgets & more will be available to purchase for $49 following the online event.

All live events will be available to watch after the live stream at a time to suit you & are completely free to watch. To register your interest in attending our online user group meeting, simply click here:
https://confirmsubscription.com/h/r/9D7 ... 23F30FEDED.

Watch this space for the full agenda coming soon.

We will be taking NEW bookings for the 2021 from 1st October 2020.

User avatar
Rcnewcomb
Vectric Wizard
Posts: 4054
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: GCnC/WinCNC
Location: San Jose, California, USA
Contact:

Re: 2020 User Group Meeting - San Diego

Post by Rcnewcomb »

Thanks! I have signed up for the live stream.
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

User avatar
scottp55
Vectric Wizard
Posts: 3827
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: 2020 User Group Meeting - San Diego

Post by scottp55 »

Just signed up as well....Sounds NICE!! :)
scott
"Flatness is King"
Brady W.

scott

Stephanie Downing
Vectric Staff
Posts: 317
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2020 User Group Meeting - San Diego

Post by Stephanie Downing »

Fantastic news Randall & Scott.

We can't wait to bring everyone together, just like we would have in San Diego :)

User avatar
highpockets
Vectric Wizard
Posts: 3226
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: 2020 User Group Meeting - San Diego

Post by highpockets »

Just signed up for the online meeting....
John
Maker of Chips

SteveNelson46
Vectric Wizard
Posts: 875
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger using WinCNC
Location: Tucson, Az.

Re: 2020 User Group Meeting - San Diego

Post by SteveNelson46 »

I signed up also. It's disappointing that we will not be able to attend the conference in San Diego but at least the online conference will soften the blow.
Steve

User avatar
rtibbs
Vectric Craftsman
Posts: 298
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: 2020 User Group Meeting - San Diego

Post by rtibbs »

Signed up. Sure beats wanting to get on an airplane right now

User avatar
scottp55
Vectric Wizard
Posts: 3827
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: 2020 User Group Meeting - San Diego

Post by scottp55 »

Martin....you going to attend????
"Flatness is King"
Brady W.

scott

User avatar
Rcnewcomb
Vectric Wizard
Posts: 4054
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: GCnC/WinCNC
Location: San Jose, California, USA
Contact:

Re: 2020 User Group Meeting - San Diego

Post by Rcnewcomb »

We have been working very closely with the hotel’s events team to re-arrange our event and we are thrilled to announce our User Group Meeting has been rescheduled to go ahead on the new dates
Do we need to contact the hotel to cancel the 2020 reservation, or will they move it to 2021 automagically?
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

User avatar
highpockets
Vectric Wizard
Posts: 3226
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: 2020 User Group Meeting - San Diego

Post by highpockets »

Rcnewcomb wrote:
Fri Jun 19, 2020 2:35 am
We have been working very closely with the hotel’s events team to re-arrange our event and we are thrilled to announce our User Group Meeting has been rescheduled to go ahead on the new dates
Do we need to contact the hotel to cancel the 2020 reservation, or will they move it to 2021 automagically?
Have to cancel, the 2021 block isn't setup yet. Stephanie said we'd be notified when we can re-book our rooms.
John
Maker of Chips

garylmast
Vectric Wizard
Posts: 1092
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: 2020 User Group Meeting - San Diego

Post by garylmast »

Just signed up. I like the idea of live streaming, it should be great.

Gary

ohiolyons
Vectric Wizard
Posts: 512
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ HHC, 3HP
Location: Kettering, Ohio

Re: 2020 User Group Meeting - San Diego

Post by ohiolyons »

I'm signed up
John
CNC in Kettering, Ohio

CanisLupus
Posts: 36
Joined: Thu Apr 04, 2019 12:53 am
Model of CNC Machine: CAMaster Stinger II (SR-44)
Location: Upper Midwest US

Re: 2020 User Group Meeting - San Diego

Post by CanisLupus »

Signed up...

I attended my first UG meeting last year in Denver. It was a lot of fun and I learned a bunch. I found the community to be welcoming and so willing to share. It's really incredible!

Earlier tonight, we were discussing a road trip from the midwest to attend this year's UG. Yeah, postponement/cancellation is disappointing but I understand the reasons. Looking forward to the virtual event and hopefully, the current situation will clear up so we can attend in-person the next UG meeting.

User avatar
Uncle Bob
Posts: 24
Joined: Sun Jan 14, 2018 3:28 am
Model of CNC Machine: Legacy Maverick 3x5 ATC
Location: Culpeper, VA USA

Re: 2020 User Group Meeting - San Diego

Post by Uncle Bob »

Any future plans to move the site to mid-America or the east coast? Long way to travel.....

Post Reply