2020 User Group Meeting - San Diego
-
- Vectric Wizard
- Posts: 724
- Joined: Sun Jun 16, 2013 4:40 am
- Model of CNC Machine: Home Built 4-axis Router
- Location: Fort Collins, CO
Re: 2020 User Group Meeting - San Diego
Yes, still planning to be there as well. As long as we find campgrounds along the way...
Dovetail and Finger Joint, Puzzle, Maze and Guilloche freeware at fabrikisto.com/tailmaker-software
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: 2020 User Group Meeting - San Diego
2020 User Group Meeting - Postponed until 10th & 11th September 2021
After a lot of consideration, we have taken the decision to postpone our upcoming User Group Meeting, which was due to be held at the Double Tree Hilton hotel in San Diego on 25th & 26th September 2020.
This decision has not been taken lightly, everyone here at Vectric has been looking forward to our User Group Meeting and is disappointed that this year, we will not get the opportunity to meet our community in person. However, the health and safety of our attendees, partners and staff is and always will be, our number one priority.
We have been working very closely with the hotel’s events team to re-arrange our event and we are thrilled to announce our User Group Meeting has been rescheduled to go ahead on the new dates - 10th and 11th September 2021 at the same Double Tree Hilton Hotel in San Diego.
For those of you who have purchased a ticket for our 2020 User Group Meeting, please don't worry. We have contacted you via email independently to let you know what to do next. If you haven't received your email please contact sales@vectric.com.
We really hope you can join us next year for an even bigger and better meeting!
We’re not going to give up on bringing our community together this year that easily!
Although the circumstances around the world prevent international travel, we are making the most of today’s technology to bring our community together in our first ever worldwide user group meeting!
Join us from the comfort of your own home for LIVE training sessions, Q&A opportunities and more, not only from the Vectric team but also from a variety of our partner and guest speakers.
We will be hosting our online meeting throughout the 24th, 25th and 26th September 2020, giving you the chance to meet people from all over the world, share tips and advice and see how they are using the software.
All the included project files, 3D clipart, gadgets & more will be available to purchase for $49 following the online event.
All live events will be available to watch after the live stream at a time to suit you & are completely free to watch. To register your interest in attending our online user group meeting, simply click here:
https://confirmsubscription.com/h/r/9D7 ... 23F30FEDED.
Watch this space for the full agenda coming soon.
We will be taking NEW bookings for the 2021 from 1st October 2020.
After a lot of consideration, we have taken the decision to postpone our upcoming User Group Meeting, which was due to be held at the Double Tree Hilton hotel in San Diego on 25th & 26th September 2020.
This decision has not been taken lightly, everyone here at Vectric has been looking forward to our User Group Meeting and is disappointed that this year, we will not get the opportunity to meet our community in person. However, the health and safety of our attendees, partners and staff is and always will be, our number one priority.
We have been working very closely with the hotel’s events team to re-arrange our event and we are thrilled to announce our User Group Meeting has been rescheduled to go ahead on the new dates - 10th and 11th September 2021 at the same Double Tree Hilton Hotel in San Diego.
For those of you who have purchased a ticket for our 2020 User Group Meeting, please don't worry. We have contacted you via email independently to let you know what to do next. If you haven't received your email please contact sales@vectric.com.
We really hope you can join us next year for an even bigger and better meeting!
We’re not going to give up on bringing our community together this year that easily!
Although the circumstances around the world prevent international travel, we are making the most of today’s technology to bring our community together in our first ever worldwide user group meeting!
Join us from the comfort of your own home for LIVE training sessions, Q&A opportunities and more, not only from the Vectric team but also from a variety of our partner and guest speakers.
We will be hosting our online meeting throughout the 24th, 25th and 26th September 2020, giving you the chance to meet people from all over the world, share tips and advice and see how they are using the software.
All the included project files, 3D clipart, gadgets & more will be available to purchase for $49 following the online event.
All live events will be available to watch after the live stream at a time to suit you & are completely free to watch. To register your interest in attending our online user group meeting, simply click here:
https://confirmsubscription.com/h/r/9D7 ... 23F30FEDED.
Watch this space for the full agenda coming soon.
We will be taking NEW bookings for the 2021 from 1st October 2020.
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: 2020 User Group Meeting - San Diego
Thanks! I have signed up for the live stream.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 2020 User Group Meeting - San Diego
Just signed up as well....Sounds NICE!!
scott
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: 2020 User Group Meeting - San Diego
Fantastic news Randall & Scott.
We can't wait to bring everyone together, just like we would have in San Diego
We can't wait to bring everyone together, just like we would have in San Diego
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: 2020 User Group Meeting - San Diego
Just signed up for the online meeting....
John
Maker of Chips
Maker of Chips
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: 2020 User Group Meeting - San Diego
I signed up also. It's disappointing that we will not be able to attend the conference in San Diego but at least the online conference will soften the blow.
Steve
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: 2020 User Group Meeting - San Diego
Signed up. Sure beats wanting to get on an airplane right now
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 2020 User Group Meeting - San Diego
Martin....you going to attend????
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: 2020 User Group Meeting - San Diego
Do we need to contact the hotel to cancel the 2020 reservation, or will they move it to 2021 automagically?We have been working very closely with the hotel’s events team to re-arrange our event and we are thrilled to announce our User Group Meeting has been rescheduled to go ahead on the new dates
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: 2020 User Group Meeting - San Diego
Have to cancel, the 2021 block isn't setup yet. Stephanie said we'd be notified when we can re-book our rooms.Rcnewcomb wrote: ↑Fri Jun 19, 2020 2:35 amDo we need to contact the hotel to cancel the 2020 reservation, or will they move it to 2021 automagically?We have been working very closely with the hotel’s events team to re-arrange our event and we are thrilled to announce our User Group Meeting has been rescheduled to go ahead on the new dates
John
Maker of Chips
Maker of Chips
Re: 2020 User Group Meeting - San Diego
Just signed up. I like the idea of live streaming, it should be great.
Gary
Gary
-
- Posts: 40
- Joined: Thu Apr 04, 2019 12:53 am
- Model of CNC Machine: CAMaster Stinger II (SR-44)
- Location: Upper Midwest US
Re: 2020 User Group Meeting - San Diego
Signed up...
I attended my first UG meeting last year in Denver. It was a lot of fun and I learned a bunch. I found the community to be welcoming and so willing to share. It's really incredible!
Earlier tonight, we were discussing a road trip from the midwest to attend this year's UG. Yeah, postponement/cancellation is disappointing but I understand the reasons. Looking forward to the virtual event and hopefully, the current situation will clear up so we can attend in-person the next UG meeting.
I attended my first UG meeting last year in Denver. It was a lot of fun and I learned a bunch. I found the community to be welcoming and so willing to share. It's really incredible!
Earlier tonight, we were discussing a road trip from the midwest to attend this year's UG. Yeah, postponement/cancellation is disappointing but I understand the reasons. Looking forward to the virtual event and hopefully, the current situation will clear up so we can attend in-person the next UG meeting.
- Uncle Bob
- Vectric Apprentice
- Posts: 61
- Joined: Sun Jan 14, 2018 3:28 am
- Model of CNC Machine: Legacy Maverick 3x5 ATC
- Location: Culpeper, VA USA
Re: 2020 User Group Meeting - San Diego
Any future plans to move the site to mid-America or the east coast? Long way to travel.....