Support Pages and Frequently Asked Questions
-
- Posts: 1
- Joined: Thu Feb 04, 2021 6:59 pm
- Model of CNC Machine: CNC Shark HD510
Re: Support Pages and Frequently Asked Questions
Hi, I am trying to import images to my vcarve. What type of files will work? When I select import, it is not pulling up my image
- Rcnewcomb
- Vectric Archimage
- Posts: 6367
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Support Pages and Frequently Asked Questions
The following links may help:import images to my vcarve.
Can I work with an image file (bmp, tiff, jpeg etc.)?
What vector file formats can I import?
What 3D file formats can I import into VCarve?
FAQ for VCarve
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Posts: 15
- Joined: Thu Apr 04, 2019 5:20 pm
- Model of CNC Machine: Bobs CNC - KL7-44
Re: Support Pages and Frequently Asked Questions
I've been using Vcarve Desktop and Pro for a couple years and last night I made a file and finished it, saved and closed. Today I went to open the file and Vcarve would not open, I received this popup. I uninstalled the program and reinstalled it, all went fine, but when I tried opening the new install, same thing. Hope I can get some help here. I emailed Vectric as well. TIA
- Adrian
- Vectric Archimage
- Posts: 15381
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Support Pages and Frequently Asked Questions
You can try going to the Program Files folder where VCarve is installed and running the vcredist_vc110... file in administrator mode.
-
- Vectric Apprentice
- Posts: 54
- Joined: Mon Jul 19, 2021 9:14 pm
- Model of CNC Machine: AvidCNC
Re: Support Pages and Frequently Asked Questions
Maybe this is a question for the admins.
Where can I ask specific questions on how to design parts for fine furniture or cabinets?
Could you add a section for those interested in Cabinet making.
Where can I ask specific questions on how to design parts for fine furniture or cabinets?
Could you add a section for those interested in Cabinet making.
- Adrian
- Vectric Archimage
- Posts: 15381
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Support Pages and Frequently Asked Questions
This is really a user to user support forum for the use of the Vectric software. I'm not sure there is enough to discuss about using the software to make furniture or cabinets that would warrant a whole new forum section. Generally those topics, when they come up, are discussed in the VCarve or Aspire general sections depending which product is being used. There is some discussion in the Gadgets forums as there are some gadgets that Jim has developed for making cabinets.
Just my opinion as a user. Vectric, and others, may think differently.
-
- Vectric Apprentice
- Posts: 54
- Joined: Mon Jul 19, 2021 9:14 pm
- Model of CNC Machine: AvidCNC
Re: Support Pages and Frequently Asked Questions
Yes I agree with you that this a user forum. The "General" topic is such a large topic, I was just throwing my two cents in that we need a bit more organization on specific topics and uses - Carving, inlays, toys etc, wedding gifts stools and the lists goes on.
- Adrian
- Vectric Archimage
- Posts: 15381
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Support Pages and Frequently Asked Questions
Problem is we already have sub forums and they aren't used properly.
People post stuff all the time in general that should be in the sub forums such as pictures of projects (should be in the gallery), queries about gadgets, queries about post processors, rotary questions, hardware questions etc etc.
I think it's about right at the moment. If everyone used the right category for every post then more categories would make things easier to find but they are never going to.
People post stuff all the time in general that should be in the sub forums such as pictures of projects (should be in the gallery), queries about gadgets, queries about post processors, rotary questions, hardware questions etc etc.
I think it's about right at the moment. If everyone used the right category for every post then more categories would make things easier to find but they are never going to.
- Rcnewcomb
- Vectric Archimage
- Posts: 6367
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Support Pages and Frequently Asked Questions
You can use your favorite search engine and type in:
furniture site:forum.vectric.com
to search the forum for more specific keywords such as furniture
Look at the advanced search features on your favorite internet search engine for additional features. For example this looks for cherry and chair but excludes results with walnut:
chair cherry -walnut site:forum.vectric.com
furniture site:forum.vectric.com
to search the forum for more specific keywords such as furniture
Look at the advanced search features on your favorite internet search engine for additional features. For example this looks for cherry and chair but excludes results with walnut:
chair cherry -walnut site:forum.vectric.com
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- adze_cnc
- Vectric Wizard
- Posts: 5182
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008 (VCarve Pro v9.519)
- Location: Vancouver, BC, Canada
Re: Support Pages and Frequently Asked Questions
Updated link for "chair cherry -walnut": https://duckduckgo.com/?q=chair+cherry+ ... =h_&ia=web
-
- Posts: 2
- Joined: Tue Nov 30, 2021 6:25 pm
- Model of CNC Machine: Alarsis FRH
Re: Support Pages and Frequently Asked Questions
Good afternoon people
i have a doubt in v-crave pro
I'm digging 1/2 ball and it's always uneven at the top
I will send photo the 1st photo drawing the second is the fina
i have a doubt in v-crave pro
I'm digging 1/2 ball and it's always uneven at the top
I will send photo the 1st photo drawing the second is the fina
- Rcnewcomb
- Vectric Archimage
- Posts: 6367
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Support Pages and Frequently Asked Questions
Add a zero plane
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Posts: 2
- Joined: Tue Nov 30, 2021 6:25 pm
- Model of CNC Machine: Alarsis FRH
Re: Support Pages and Frequently Asked Questions
I'm just starting and I still have a lot of doubts.
How do I add the zero plane.
Thanks
How do I add the zero plane.
Thanks
- Rcnewcomb
- Vectric Archimage
- Posts: 6367
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Support Pages and Frequently Asked Questions
Model/Create Component/Add Zero Plane.
I strongly recommend that you not only watch the videos, but follow along in your own copy of the software. It will save you a lot of struggles later on.
I strongly recommend that you not only watch the videos, but follow along in your own copy of the software. It will save you a lot of struggles later on.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Posts: 7
- Joined: Tue Dec 28, 2021 7:25 pm
- Model of CNC Machine: sd100
- Location: Zephyrhills FL
Help
Are there any experts, or well versed in the Vcarve desktop software program that live in the Tampa / Zephyrhills area of Florida, that would be willing to make a house call to help a new user of Vcarve that is totally lost getting started. I will pay for your time and expenses. I have tried the support people, but can't make heads or tails out of what they tell me to do. I\downloaded some D&M clip art, but can't find it in my computer, Heck, I can't even find the "clip art library". I am a newbee at Vectric but have on computers since the Radio Shack Model 1 was new. Sometimes longevity just doesn't count. Well, that's my story, and I'm sticking to it.