Support Pages and Frequently Asked Questions

Post general information and questions relating to Cut2D in this Forum.
User avatar
Adrian
Vectric Archimage
Posts: 10225
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Support Pages and Frequently Asked Questions

Post by Adrian »

JoeBlow wrote:Question regarding End User License Agreement....

I am using the current version of Aspire and in the clipart is a 3d model that is just perfect on a product I make. I have only prototyped a few and have not sold or given away any of these with the clipart model. I don't want to be that guy and I highly respect copyright laws. With that said, I have searched the internet for a similar model that I could purchase and use for resale on my product. No luck. I have considered hiring someone to make me a similar model but don't want to be that guy that does a few tweeks and stands by the "artistic expression" nonsense justification.
I don't read the EULA in that way. To me it's saying you can create and sell items you've made using the free clipart provided it's not made in a mass production way such as moulds etc.

User avatar
JoeBlow
Vectric Apprentice
Posts: 51
Joined: Wed Nov 21, 2018 11:19 am
Model of CNC Machine: AxiomAR6Pro

Re: Support Pages and Frequently Asked Questions

Post by JoeBlow »

scottp55 wrote: Go D&M and rest easy:)
scott
Resting easy is my 2nd favorite thing to do :D :D

Thanks for the clarification on the included clipart Adrian. I re-read the clipart license agreement from Vectric and interpreted the part about "not for resale or redistribution......" as not being able to use on a product I make.


Clipart License
License Agreement Vector Art 3D, Inc. grants you a non-exclusive limited license to use the computer models as decorative or illustrative material that is included as part of or all of a computer model, CNC carved design or a part grown on rapid prototyping equipment (rendered in any substrates), produced for you, your employer, or a client, that is not for resale or redistribution as art for reproduction or as any form of stock design. You may not use any of the models in whole or in part, for multiple resales in the form of molded parts, castings or other mass production methods etc., without the express written permission of Vector Art 3D, Inc

roydant
Posts: 2
Joined: Sat Jul 13, 2019 4:55 pm
Model of CNC Machine: Axiom Precision Pro+

Re: Support Pages and Frequently Asked Questions

Post by roydant »

Is there a way to import a bit profile that is different from the standard tools listed?

An example is a whiteside SC55 engraving bit but with a 45Deg point on the end.

roydant
Posts: 2
Joined: Sat Jul 13, 2019 4:55 pm
Model of CNC Machine: Axiom Precision Pro+

Re: Support Pages and Frequently Asked Questions

Post by roydant »

Never mind figured it out using the form tool function.
Roydan

Ron57
Posts: 2
Joined: Mon Apr 15, 2019 5:32 am
Model of CNC Machine: Stylecnc Stj1390

Re: Support Pages and Frequently Asked Questions

Post by Ron57 »

I have a stl file for a comb how can I do the teeth separate from the main part as I will need to use a different bit?

User avatar
Mike-S
Vectric Wizard
Posts: 1115
Joined: Mon Jun 13, 2011 6:45 am
Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
Location: Hayesville, NC

Re: Support Pages and Frequently Asked Questions

Post by Mike-S »

Draw a vector around the comb's handle and mill. Then another vector around the teeth you want to mill.
Attachments
VectorBounded.jpg

makecnc
Vectric Apprentice
Posts: 31
Joined: Thu Aug 05, 2010 2:44 am
Model of CNC Machine: many
Location: Minnesota
Contact:

Re: cant see profiles etc

Post by makecnc »

Hello, can someone please help i do not seem to be able to send a private message to friends any long or view profiles of members etc ?

linkreincarnate
Posts: 5
Joined: Sat Jan 04, 2020 4:43 am
Model of CNC Machine: MillRight Power Route

Re: Support Pages and Frequently Asked Questions

Post by linkreincarnate »

On the product comparison page (I've attatched an image) it says vcarve desktop is capable of 4 sided machining. I cannot figure out how to enable the feature or set up a 4 sided machining job though. Can I get some help? Did I purchase the wrong software to do 4 sided manually indexed jobs? Was the advertising wrong?
Attachments
manual flip.png

User avatar
highpockets
Vectric Wizard
Posts: 2943
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Support Pages and Frequently Asked Questions

Post by highpockets »

Watch this Vectric Tutorial on Multi Sided Parts
John
Maker of Chips

linkreincarnate
Posts: 5
Joined: Sat Jan 04, 2020 4:43 am
Model of CNC Machine: MillRight Power Route

Re: Support Pages and Frequently Asked Questions

Post by linkreincarnate »

That is exactly what I needed. Thanks.

linkreincarnate
Posts: 5
Joined: Sat Jan 04, 2020 4:43 am
Model of CNC Machine: MillRight Power Route

Re: Support Pages and Frequently Asked Questions

Post by linkreincarnate »

Is there a place to report replicatable bugs? I found a couple.

User avatar
Rcnewcomb
Vectric Wizard
Posts: 3798
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: GCnC/WinCNC
Location: San Jose, California, USA
Contact:

Re: Support Pages and Frequently Asked Questions

Post by Rcnewcomb »

Is there a place to report replicatable bugs? I found a couple.
send an email to support@vectric.com
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

dlpetker
Posts: 2
Joined: Sat Jan 18, 2020 2:27 pm
Model of CNC Machine: Next Wave & Axiom

Re: Support Pages and Frequently Asked Questions

Post by dlpetker »

Please help.

I am looking for someone to help with creating vectors from images and photos with Aspire. Any suggestions?

User avatar
Adrian
Vectric Archimage
Posts: 10225
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Support Pages and Frequently Asked Questions

Post by Adrian »

dlpetker wrote:Please help.

I am looking for someone to help with creating vectors from images and photos with Aspire. Any suggestions?
Have you tried these tutorials - https://www.vectric.com/support/tutoria ... ch=tracing

sharkcutup
Vectric Wizard
Posts: 580
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Contact:

Re: Support Pages and Frequently Asked Questions

Post by sharkcutup »

dlpetker wrote:
Please help.

I am looking for someone to help with creating vectors from images and photos with Aspire. Any suggestions?

Why just Aspire?

Vectors can be drawn from images and photos in V-Carve Pro too!

Sharkcutup
Facebook: Hogan's CNC Crafts
www.hoganscnccrafts.com
V-Carve Pro 9.519

Post Reply