Hi!
What is the biggest area Cut2D Desktop can cut?
I know my machines limits, but not Cut2Ds.
I ask because I have a project there I placed a pocket
on the far right of the material but when I cut, the pocket
is placed 20mm to the left of the right side...
Regards
Thomas
Cutting area for Cut2D Desktop?
- Adrian
- Vectric Archimage
- Posts: 14684
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Cutting area for Cut2D Desktop?
Cut2D Desktop has a 24" x 24" limit but it won't let you generate toolpaths that exceed that limit so that's not your problem.
Have you cut with the machine before? Has it been calibrated?
Have you cut with the machine before? Has it been calibrated?
Re: Cutting area for Cut2D Desktop?
I have used Candle before and cut things with, but not at the border at material.
I am not sure if it has been calibrated......yes I'm a newbie....
I am beginning to understand that I need to look more into the setting of Cut2D Desktop,
I just started the program and run it with one of the proposed machine (my own wasn't
there). I will check out more info and getting back if I need some additional help.
Thanks for your help.
Regards
Thomas
I am not sure if it has been calibrated......yes I'm a newbie....
I am beginning to understand that I need to look more into the setting of Cut2D Desktop,
I just started the program and run it with one of the proposed machine (my own wasn't
there). I will check out more info and getting back if I need some additional help.
Thanks for your help.
Regards
Thomas