A couple more Vcarve projects
- scotttarnor
- Vectric Wizard
- Posts: 944
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: A couple more Vcarve projects
Merry Christmas Scott!
That couple came out Great!!
(even with the weird marks you had:)
Is that black paint that covered the marks so well?
Be Well!
scott
That couple came out Great!!
(even with the weird marks you had:)
Is that black paint that covered the marks so well?
Be Well!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- scotttarnor
- Vectric Wizard
- Posts: 944
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: A couple more Vcarve projects
Merry Christmas Scott! The paint is just black acrylic it is what I have been using on all my photos lately, I have better luck with it than gel stain. I started sanding all the unexpected lines out but then decided to leave some of them. I thought the texture might look good in the large black areas.
No requested work this weekend so I am hope to get back on the bear project, I have some bits to try on the plexiglass.
No requested work this weekend so I am hope to get back on the bear project, I have some bits to try on the plexiglass.
Scott T
@scottscnc
@scottscnc
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: A couple more Vcarve projects
Thanks Scott,
Good to know as I bought some for my Lemur project:)
Haven't played with any of the Photo carves yet.
Never bought the PhotoVCarve standalone either, but ya never know:)
Good luck on plexi!
Got a little weather here:)
Phone down, multi second power blips and full outage expected in a few hours.
At least I'm 55F, and don't have Iguanas falling out of trees like in Florida:)
Had a 14" snowpack yesterday...watching bare ground reappear in real time as 2" of rain falls:)
All I need is for some decent branches to fall where I can reach them now:)
Merry Christmas!
scott
Good to know as I bought some for my Lemur project:)
Haven't played with any of the Photo carves yet.
Never bought the PhotoVCarve standalone either, but ya never know:)
Good luck on plexi!
Got a little weather here:)
Phone down, multi second power blips and full outage expected in a few hours.
At least I'm 55F, and don't have Iguanas falling out of trees like in Florida:)
Had a 14" snowpack yesterday...watching bare ground reappear in real time as 2" of rain falls:)
All I need is for some decent branches to fall where I can reach them now:)
Merry Christmas!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: A couple more Vcarve projects
Haven’t noticed any Iguanas falling from the trees yet but it is colder down here in FL than where you are. Go figure
Snow. I don’t miss it. I lived in NH for eleven years and had my fill of the stuff. Remember the days when my snowblower couldn’t throw it high enough.
Stay safe,
Ron