A couple more Vcarve projects

Gallery for images of work cut using PhotoVCarve
Post Reply
User avatar
scotttarnor
Vectric Wizard
Posts: 938
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

A couple more Vcarve projects

Post by scotttarnor »

2 of my latest projects
Attachments
84A3212D-C113-4005-8083-CAA79E42545B.jpeg
F7E01E16-37F4-4806-A8DF-DAD76DB190D0.jpeg
Scott T

@scottscnc

User avatar
scottp55
Vectric Wizard
Posts: 4704
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: A couple more Vcarve projects

Post by scottp55 »

Merry Christmas Scott!
That couple came out Great!! :)
(even with the weird marks you had:)
Is that black paint that covered the marks so well?
Be Well!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
scotttarnor
Vectric Wizard
Posts: 938
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: A couple more Vcarve projects

Post by scotttarnor »

Merry Christmas Scott! The paint is just black acrylic it is what I have been using on all my photos lately, I have better luck with it than gel stain. I started sanding all the unexpected lines out but then decided to leave some of them. I thought the texture might look good in the large black areas.
No requested work this weekend so I am hope to get back on the bear project, I have some bits to try on the plexiglass.
Scott T

@scottscnc

User avatar
scottp55
Vectric Wizard
Posts: 4704
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: A couple more Vcarve projects

Post by scottp55 »

Thanks Scott,
Good to know as I bought some for my Lemur project:)
Haven't played with any of the Photo carves yet.
Never bought the PhotoVCarve standalone either, but ya never know:)

Good luck on plexi!
Got a little weather here:)
Phone down, multi second power blips and full outage expected in a few hours.
At least I'm 55F, and don't have Iguanas falling out of trees like in Florida:)
Had a 14" snowpack yesterday...watching bare ground reappear in real time as 2" of rain falls:)
All I need is for some decent branches to fall where I can reach them now:)
Merry Christmas!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
rtibbs
Vectric Wizard
Posts: 411
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: A couple more Vcarve projects

Post by rtibbs »

scottp55 wrote:
Fri Dec 25, 2020 2:21 pm

At least I'm 55F, and don't have Iguanas falling out of trees like in Florida:)
Had a 14" snowpack yesterday...watching bare ground reappear in real time as 2" of rain falls:)
Merry Christmas!
scott
Haven’t noticed any Iguanas falling from the trees yet but it is colder down here in FL than where you are. Go figure :?

Snow. I don’t miss it. I lived in NH for eleven years and had my fill of the stuff. Remember the days when my snowblower couldn’t throw it high enough.

Stay safe,
Ron

Post Reply