First lithophane

Gallery for images of work cut using PhotoVCarve
Post Reply
User avatar
Greasetattoo
Vectric Wizard
Posts: 854
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

First lithophane

Post by Greasetattoo »

Well, here is my first attempt at a lithophane.
I did it on my Sherline converted Mill.

I used a .125 ball nose for the roughing
I used a .0625 Beckwith ball nose for the finishing.

Enjoy....gotta go make another...

I am going to make the frame next...
Attachments
litho lit.jpg
litho.jpg

Khalid
Vectric Craftsman
Posts: 232
Joined: Thu Jun 19, 2008 1:01 pm
Location: Pakistan

Post by Khalid »

Very good and neat work u did:)..How long it took to complete the machining ?..What IPM u used?...I also want to do such lithoplanes but currently i dont have resources..

Please post the complete litho with frame when completed..

Regards

User avatar
js11110
Vectric Wizard
Posts: 859
Joined: Tue Apr 18, 2006 12:19 pm
Location: Sunny Florida

Post by js11110 »

Grease-

Addicting, isn't it? You were warned!! :lol: Great job!!

Jason
The Official Vectric Cartographer


You are limited only by your imagination

User avatar
crocky
Vectric Craftsman
Posts: 120
Joined: Sat Apr 14, 2007 6:56 am
Location: Hoppers Crossing, Vic, Aust

Post by crocky »

That is pretty darn good :)

The addiction starts :) you only have to get better at it :)
Cheers,
Bob
Aspire, VCarve Pro, PhotoVCarve
Blog: http://www.ocm.com.au/wordpress/

User avatar
Greasetattoo
Vectric Wizard
Posts: 854
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

Post by Greasetattoo »

Yet, another...

Frames coming next....

My father in 1946'.
Attachments
litho 01.jpg

User avatar
Greasetattoo
Vectric Wizard
Posts: 854
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

Post by Greasetattoo »

Frame, something like this.

Will hang on window.
Suction cups.

Will post when I complete them..
Attachments
test.jpg

User avatar
Greasetattoo
Vectric Wizard
Posts: 854
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

Post by Greasetattoo »

Prototype number one..

Still needs a clear coat and the hanger.

It is 2 halves.
The litho is sandwiched between them.
Attachments
frame01.jpg
frame.jpg

User avatar
lovebugjunkie
Vectric Wizard
Posts: 351
Joined: Tue Jul 10, 2007 1:12 am
Model of CNC Machine: Romaxx HS1
Location: USA

Post by lovebugjunkie »

Like your frame ideas, nice job.

Post Reply