Carve for a friend

Gallery for images of work cut using PhotoVCarve
Post Reply
User avatar
scotttarnor
Vectric Wizard
Posts: 938
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Carve for a friend

Post by scotttarnor »

A coworker's Brother passed away and he asked me to do a carve for him, He was very set in his way on the layout(I believe I would have done it different) and he also wanted it rough like a packing crate.
His brother was a Press operator and loved his boat a Cruiser. He wanted a Franklin Press and a Cruiser on the front.
I think they turned out fairly well for what I had to work with
Attachments
tim box front.jpg
Scott T

@scottscnc

Bob Reda
Vectric Wizard
Posts: 858
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: Carve for a friend

Post by Bob Reda »

very nice

User avatar
TReischl
Vectric Wizard
Posts: 4567
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: Carve for a friend

Post by TReischl »

Turned out nicely, I especially like the printing press, has that old time look to it. The boat is good too, looks right sitting in the water.
"If you see a good fight, get in it." Dr. Vernon Johns

User avatar
scottp55
Vectric Wizard
Posts: 4704
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Carve for a friend

Post by scottp55 »

You gave the recipient what he wanted Scott.
Well Done!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

Post Reply