Latest and greatest?
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Latest and greatest?
Desktop V10
Maple 7.25 X 9"
.25" 60° 3 flute (whiteside 1541)
Depth per pass .020" 100 IPM
Max depth .035"
150%
75° angle
Apply sanding sealer, let dry, apply black paint, let dry, sand with 150 grit.
Comments and suggestions for improvements are welcome.
close up. From 5 feet away.
Sorry about the messy shop.
Maple 7.25 X 9"
.25" 60° 3 flute (whiteside 1541)
Depth per pass .020" 100 IPM
Max depth .035"
150%
75° angle
Apply sanding sealer, let dry, apply black paint, let dry, sand with 150 grit.
Comments and suggestions for improvements are welcome.
close up. From 5 feet away.
Sorry about the messy shop.
“I've learned so much from my mistakes, I'm thinking of making a few more”
Re: Latest and greatest?
Looks great! I got involved in a mess of other projects and I plan to get back to the photo engraving soon. I did note your settings and technique. Lastly, your work area is not a mess... I call that comfort... lol. I'd be embarrassed to show pics of mine tho... lol.
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Latest and greatest?
To paraphrase an old adage, A cluttered shop is a sign of craftsmanship!
Your picture looks great. Makes me want to give that feature in V10 a try.
Your picture looks great. Makes me want to give that feature in V10 a try.
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- scotttarnor
- Vectric Wizard
- Posts: 944
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: Latest and greatest?
On your process, when do you apply the sanding sealer? Before or after the carving.Jan.vanderlinden wrote:Desktop V10
Maple 7.25 X 9"
.25" 60° 3 flute (whiteside 1541)
Depth per pass .020" 100 IPM
Max depth .035"
150%
75° angle
Apply sanding sealer, let dry, apply black paint, let dry, sand with 150 grit.
Comments and suggestions for improvements are welcome.
I thought the 45 degree angle was the standard. I'll have to play with that and up it some to see the differences. I tried one yesterday of an old basic training picture I had that I wanted to do for my military keepsake box lid. When I viewed it, it looked ok with the constant nips making the picture. I Shellac it first and let dry, but when it carved, it was bare-butt smooth and I thought another scrap wood! However, I applied a light coat of blue spray paint and let that dry, then sanded it... it came out pretty darn good, I am surprised. It was a trial. So I'll keep at it!
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: Latest and greatest?
I apply the sealer after carving.
I do that to prevent the paint from bleeding.
I have applied the sealer before carving in an attempt to prevent chip out, but it really didn't work well.
The last few days Im struggling again.
Nothing seems to work out and I'm making expensive firewood.
I still don't have an understanding of the % setting.
I can't seem to cut anything under 150% without tearout of the passes.
But at 150% the pictures look horrible. (in my opinion)
I need to get an understanding of the % calculation and how it relates to the stepover distance.
Send a picture of your project. I would love to compare our results.
I do that to prevent the paint from bleeding.
I have applied the sealer before carving in an attempt to prevent chip out, but it really didn't work well.
The last few days Im struggling again.
Nothing seems to work out and I'm making expensive firewood.
I still don't have an understanding of the % setting.
I can't seem to cut anything under 150% without tearout of the passes.
But at 150% the pictures look horrible. (in my opinion)
I need to get an understanding of the % calculation and how it relates to the stepover distance.
Send a picture of your project. I would love to compare our results.
“I've learned so much from my mistakes, I'm thinking of making a few more”
- scotttarnor
- Vectric Wizard
- Posts: 944
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: Latest and greatest?
Ok, here is my example I tried. First pic is the original. My basic training.
Second pic was the photovcarve after I sprayed it with blue paint and sanded. Of course my sanding got a little carried away, but it still turned out not too bad for a trial. The last pic is a close up... notice it is all smooth and no nubs. As I said, I am surprised it came out like it did.
Second pic was the photovcarve after I sprayed it with blue paint and sanded. Of course my sanding got a little carried away, but it still turned out not too bad for a trial. The last pic is a close up... notice it is all smooth and no nubs. As I said, I am surprised it came out like it did.
Re: Latest and greatest?
My settings for this was:
Start depth: 0
max depth: .03
stepover: .1
45 deg V bit (brand new and very sharp)
Raster
line space: 20%
line angle: 45 deg
as I said before, Vcarve preview looked like it was going to be full of little nubs, but there isn't any that is too visible.
Oh! and I shellac'd the whole thing before I carved.
Start depth: 0
max depth: .03
stepover: .1
45 deg V bit (brand new and very sharp)
Raster
line space: 20%
line angle: 45 deg
as I said before, Vcarve preview looked like it was going to be full of little nubs, but there isn't any that is too visible.
Oh! and I shellac'd the whole thing before I carved.
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: Latest and greatest?
Very interesting.
Where do you set the step over?
It's my understanding that its automatic by adjusting the % slider, or entering a number.
I also don't understand how you end up with a smooth carve when you used a V bit.
When I see the cusps break / chip off, I consider it a failure.
Am I missing something here?
BTW
It looks good.
Where do you set the step over?
It's my understanding that its automatic by adjusting the % slider, or entering a number.
I also don't understand how you end up with a smooth carve when you used a V bit.
When I see the cusps break / chip off, I consider it a failure.
Am I missing something here?
BTW
It looks good.
“I've learned so much from my mistakes, I'm thinking of making a few more”
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: Latest and greatest?
Finally,,,
A couple that turned out good enough for Christmas presents.
A couple that turned out good enough for Christmas presents.
“I've learned so much from my mistakes, I'm thinking of making a few more”