John Deere tractor lithophane

Gallery for images of work cut using PhotoVCarve
Post Reply
tonydude919
Vectric Wizard
Posts: 762
Joined: Sat Jan 09, 2010 7:28 am
Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
Location: Buffalo,NY

John Deere tractor lithophane

Post by tonydude919 »

Here is a John Deere Tractor made for a friends son, he's into tractors.

Tony
Attachments
John Deere litho box.jpg
John Deere tractor.jpg
What will matter is not what you bought but what you built; not what you got, but what you gave

WoodEraser
Vectric Apprentice
Posts: 198
Joined: Wed Aug 08, 2012 6:30 pm
Model of CNC Machine: Shark Pro Plus
Location: Liberty Twp (N. Cincinnati) OH

Re: John Deere tractor lithophane

Post by WoodEraser »

Nice Job Tony!
You're the master at this.
Eric
The WoodEraser

Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio

David Warkentin
Vectric Craftsman
Posts: 123
Joined: Thu Nov 01, 2012 2:05 am
Model of CNC Machine: Camaster Panther 4x8

Re: John Deere tractor lithophane

Post by David Warkentin »

Very nice. Can you tell us how long it took?

User avatar
Phil
Vectric Wizard
Posts: 2452
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: John Deere tractor lithophane

Post by Phil »

Excellent.
:D
Phil

tonydude919
Vectric Wizard
Posts: 762
Joined: Sat Jan 09, 2010 7:28 am
Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
Location: Buffalo,NY

Re: John Deere tractor lithophane

Post by tonydude919 »

It is a 5 x 7 litho. I used a .125 ball nose for the rough cut and used a .0625 ball nose for finish cut. Total depth of cut is .21 Total cut time was 4 hrs.

Tony
What will matter is not what you bought but what you built; not what you got, but what you gave

Joe Duplessis
Posts: 8
Joined: Sun Jul 14, 2013 10:37 pm
Model of CNC Machine: CNC Shark Pro Plus HD

Re: John Deere tractor lithophane

Post by Joe Duplessis »

Tony, What did you make the lithophane on Corian or cast plexiglass?

tonydude919
Vectric Wizard
Posts: 762
Joined: Sat Jan 09, 2010 7:28 am
Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
Location: Buffalo,NY

Re: John Deere tractor lithophane

Post by tonydude919 »

I use .25 corian for my lithophanes.

Tony
What will matter is not what you bought but what you built; not what you got, but what you gave

Post Reply