Here is my try at the leaf tray

The Gallery is for posting images of work machined using Cut3D
Post Reply
leehound
Posts: 6
Joined: Tue Nov 28, 2006 2:46 pm
Location: Tennessee

Here is my try at the leaf tray

Post by leehound »

I had some HI-MAC (corian like material) left over from my kitchen countertops. So here is my leaf tray. It took a bit of sanding, but the work was worth it. :mrgreen:

Scott

Image

User avatar
js11110
Vectric Wizard
Posts: 859
Joined: Tue Apr 18, 2006 12:19 pm
Location: Sunny Florida

Post by js11110 »

Wow! I realy like it. Good work!

Jason
The Official Vectric Cartographer


You are limited only by your imagination

andkal
Posts: 42
Joined: Mon Aug 14, 2006 2:07 am
Location: New England
Contact:

Post by andkal »

Scott

Can you share the cutter/settings you used for the solid surface?

Thanks
Andy K

dmidkiff
Vectric Apprentice
Posts: 58
Joined: Sat May 13, 2006 1:10 pm
Model of CNC Machine: 2010 Shop Bot PRS Alpha 18"Z
Location: Jasper, TX
Contact:

Post by dmidkiff »

Scott,

Nice work. Thanks for the Daisy STL files.

Dave

leehound
Posts: 6
Joined: Tue Nov 28, 2006 2:46 pm
Location: Tennessee

Post by leehound »

andkal wrote: Can you share the cutter/settings you used for the solid surface?
I roughed with a 1/4" end mill. I finished with a solid carbide 1/4" Ball. I don't remember the % stepover, but the steps were .005. I think it took about 3 1/2 hours to cut both side maybe 4, I'm not sure. I really wasn't concerned by how long it took, I just wanted to get a good finish.

Scott

User avatar
Thkoutsidthebox
Vectric Wizard
Posts: 1487
Joined: Wed Oct 25, 2006 3:19 pm
Location: Europe

Post by Thkoutsidthebox »

WOW! That is NICE. :D

lpcsales
Vectric Craftsman
Posts: 167
Joined: Thu Jul 13, 2006 6:22 pm
Location: NC

Post by lpcsales »

Really, really NICE!

Thanks for sharing....
Dave
Epilog 24TT 40w and Legend 36EXT 75w Laser Engravers, Roland SP-300V, BabyLoc PR600 Embroidery Machine, Panther 24" Vinyl Cutter, Mighty Presses (hat & T-Shirt), PRT48 Router

Post Reply