I absolutely love the Vectric software.
Just recently purchased 3D Cut and had my first go at it.
This is my first cut with 3D cut and slicing. Beside the sample cuts.
It seems they thought of everything for the software. Pretty neat!
One thing I would like to see is to be able to ramp off the top of a slice with adjustable settings instead of it rolling over the top of the slice. It might have it be I didn't see it.
Any info would be appreciated.
Needs finishing of course.
13 X 10 X 8 thick. Poplar
First 3D cut slice
- Xxray
- Vectric Wizard
- Posts: 2304
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: First 3D cut slice
Looks nice, looks like you might benefit from reducing stepover a bit.
Downside is more machining time, upside much cleaner cut and much less sanding.
Downside is more machining time, upside much cleaner cut and much less sanding.
Doug
-
- Vectric Wizard
- Posts: 772
- Joined: Sat Jan 09, 2010 7:28 am
- Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
- Location: Buffalo,NY
Re: First 3D cut slice
Do a stepover between 8-10% of the bit and you won't have the marks on them. What bits are you using?
Tony
Tony
What will matter is not what you bought but what you built; not what you got, but what you gave
Re: First 3D cut slice
Wish I had seen this about 6 months ago... now I'm off to experiment!
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: First 3D cut slice
I like it, even though Mickey looks like he needs a haircut.
Angie
Angie
- kandw
- Posts: 42
- Joined: Sat Sep 07, 2013 12:40 pm
- Model of CNC Machine: Romaxx WD-1
- Location: Chesapeake, VA
- Contact:
Re: First 3D cut slice
That is pretty cool.. well done!!