I have had a great deal of help with this job which has been giving me a bit of a challenge. But with the expert help and having done a test cut I'm ready to cut my complete shield which I will post up soon. The test piece will be incorporated into my shield.
One of my difficulties was in finding a realistic lookin golfer, yay we did that...
Truly these forums have some great guys on board who do put time aside to help others. I'm deeply grateful.
George
Golfer is progressing
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Golfer is progressing
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
- metalworkz
- Vectric Wizard
- Posts: 2463
- Joined: Mon Mar 31, 2008 3:26 am
- Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers
- Location: Modesto, California 95358 USA
Re: Golfer is progressing
Hello George,
The trophy plaque is looking very good so far and will be watching to see the final cut part. Keep us posted on your progress.
The trophy plaque is looking very good so far and will be watching to see the final cut part. Keep us posted on your progress.
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Re: Golfer is progressing
Well, I plucked up the courage to cut into my nice piece of Oak, I'm not dissapointed with the result. I hope Joe will be pleased.metalworkz wrote:Hello George,
The trophy plaque is looking very good so far and will be watching to see the final cut part. Keep us posted on your progress.
The 9 rectangles were pasted in using Photoshop and represent 9 Silver name places.
Many thanks to a certain gentleman for lots of advice and help.
George
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Golfer is progressing
Both the plaque and the golfer's form are looking good.
Angie
Angie
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Re: Golfer is progressing
Thanks for your kind comments.zeeway wrote:Both the plaque and the golfer's form are looking good.
Angie
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
- jonquilmusic
- Posts: 12
- Joined: Tue Nov 09, 2010 11:15 pm
Re: Golfer is progressing
A trophy worthy of the designation "trophy." REAL nice job, and a lot of thought into the layout.
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Re: Golfer is progressing
Many thanks for you kind comments.jonquilmusic wrote:A trophy worthy of the designation "trophy." REAL nice job, and a lot of thought into the layout.
George
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s