Milling Adhesive Vinyl laminated to Foam Core Board

This forum is for general discussion about Cut3D
Post Reply
Flite-Metal
Posts: 13
Joined: Thu Apr 07, 2011 3:03 pm
Model of CNC Machine: SB DeskTop

Milling Adhesive Vinyl laminated to Foam Core Board

Post by Flite-Metal »

Looking for someone or some advice ;^) relative to milling self adhesive sign
vinyl adhered to Foam Core board. I desire to mill parallel rows down to face
of the Foam Core board in kind to furrow rows a farmer makes preparing the
ground for planting. The actual result desired is a memic of corrigated sheeting.

...................................Image

Above illustration is what I desire to achieve on a solid base. Of course actual
milling is a solid, not hollow.

LittleGreyMan
Vectric Wizard
Posts: 1011
Joined: Fri May 15, 2015 1:10 pm
Model of CNC Machine: 3 axis small size machine
Location: France

Re: Milling Adhesive Vinyl laminated to Foam Core Board

Post by LittleGreyMan »

Hello,

I had perfectly cut thousands meters of adhésive vinyl on MDF board. I had a perfect cut using a sharp downcut end mill for the first pass. The feeds and speeds were the ones I needed for cutting MDF.

Just give it a try on a foam core board sample.
Best regards

Didier

W7 - Aspire 8.517

Post Reply