STL to Aspire

This forum is for general discussion about Cut3D
Post Reply
TomSn
Posts: 1
Joined: Tue Mar 21, 2023 12:02 pm
Model of CNC Machine: Large router

STL to Aspire

Post by TomSn »

Hello to all wood lovers. Does anyone have a tip on where to learn how to work with STL files in Aspire? I have some 3D scans of products that I would like to put into Aspire and then edit them. After a few tries, I ended up with the insertion and still miserable. So I thought of reaching out to the pros from the community.

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5886
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: STL to Aspire

Post by Rcnewcomb »

Look at this tutorial by Mark Lindsay: Importing STL Files - Part 20

- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
Adrian
Vectric Archimage
Posts: 14541
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: STL to Aspire

Post by Adrian »

For future threads you may create note that you've posted in the Cut3D software section rather than Aspire. You'll get a lot more responses posting in the Aspire section as the Cut3D software is very niche and not everyone looks in this area.

Post Reply