Help making a sign with raised text and 3d clipart
Moderator: Todd Bailey
-
jmendenhall22
- Posts: 9
- Joined: Wed Jul 29, 2020 1:36 am
- Model of CNC Machine: shapeoko xxl
Help making a sign with raised text and 3d clipart
Hello, I have Vectric Desktop 10.5. What I would like to do is Make a sign with raised text and a Santa sleigh from design and make clipart. I am new to Vectric and have no schooling except on line. I have figured out how to do the raised text and how to do the clip art but can't figure out how to do them both so they are on the same level at the base with the text and Sleigh approx. the same height. I would love to zoom or whatever to help me out unless there is a video out there someone knows about. Any help would be greatly appreciated. I am in my 60's and willing to learn from anyone. Thank you in advance.
-
Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Help making a sign with raised text and 3d clipart
Can you provide a rough sketch of what you want to do, or perhaps show a photo of similar designs?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop