Make A Trick Or Treat Holder - Hack of the Week No.244

[Todd Bailey]

This post is for all the Design and Make enthusiasts out there!

Just a quick post to keep you up to date on what is new over at www.DesignandMake.com.

=========================================

Introducing our latest Hack of the Week Model Project
Hack of the Week No.244
https://store.designandmake.com/shop/product/20444





Take one if you DARE!!!!

This year why not create a fun way to hand out some of your treats (social distance of course) or create a fun experience for the little ones inside the house! We have added a few clothespins to this project so you can hang sweets to be snatched up by little ghouls!

We have taken the included layout, added a bit of v-carving, and created small pockets to glue in the clothespins. We finished off our carving with a simple finish, some custom v-carving, and glued in a few pins (slightly sanded to give them an aged look).

or

If the included Assembled Layout is not just quite right, you have all you need to make it your own. Recreate the bits you like using the single models included in the hack and then add in some of your own!

4 models, 1 assembled layout, 1 Project Sheet. All offered in .V3M format for VCarve Pro 8, VCarve Desktop or Aspire.

Remember, all the models in this pack can be cut as individual models or combined with other models in your library.

=========================================

Browse all of our Hack of the Week Model Projects... https://store.designandmake.com/search/search/?q=HOTW
To see the newest hacks be sure to select "What's New" from the "Sort" dropdown.

Check out what other Design and Make users have been up to - http://designandmakeit.com/index.php/ca ... mer-focus/

Don't forget to follow us on:

FB - https://www.facebook.com/designandmakeit
Instagram - https://www.instagram.com/designandmakeit/
Twitter - https://twitter.com/DesignAndMakeIt