The Waterside Collection - Now Avaiable For Everyone!

Gallery for samples created from Design and Make 3D Machinist or using Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

The Waterside Collection - Now Avaiable For Everyone!

Post by Todd Bailey »

The Waterside Collection

The Waterside Collection
The Waterside Collection

https://store.designandmake.com/shop/product/20267

Once you have one of our Waterside projects you are sure to want to add to your collection. There are 5 individual projects that make up our Waterside Collection. All of these projects are available to purchase individually from the Project Shop for $55.00 each.

Before you purchase one or two though you might want to know that if all 5 are purchased at one time you save $75.00 on the total purchase price and pay only $200.00.

This discount is only available with purchases of all five projects made from the link above and cannot be retroactively applied after buying the individual projects.

64 Individual Models
5 projects equals 64 individual models for you to machine on their own, mix and match, or hack together to create endless layouts and projects!!

10 Pre-Assembled Layouts
Each product contains 2 assembled layouts (10 in total) to get you up and running and creating projects quickly. Cut them on their own or add a bit of V-Carving to create a personal project or special gift.

5 Project Sheets
Like all of our other projects, each Waterside Collection CNC project comes with its own Project Sheet to keep you inspired!

clipartcollectionbox.jpg
~ Click Image To Enlarge ~

Models from the Waterside Collection are featured in Vectric's Official V11 Project!

V11 Project - small.png

https://store.designandmake.com/shop/product/20267

---------------------------------------------------------------------------

Special Offer:
If you are upgrading to or purchasing VCarve Desktop/Pro or Aspire V11!
Check out this post!
viewtopic.php?f=10&t=37953
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: The Waterside Collection - Now Avaiable For Everyone!

Post by scottp55 »

One of the nicest ones you've done!! :)
BUT in the second pic way down bottom(3 master and fishing sheds on rocks)...
is there a Hack that shows the models used in that one(or maybe just a bigger pic of only that)?
REALLY like that particular scene!! :)
Glad I bought the whole collection!
Well done. :)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: The Waterside Collection - Now Avaiable For Everyone!

Post by Todd Bailey »

Hello Scott...

So glad you are liking the collection. Being from the East Coast of Canada... I can relate to all of the content we packed into this collection!

I'll attach a pic for you that is a bit clearer and a list of the models.
KeyShot - Template for D&M - 1.448.png
List of Models

Fishing Village Project:
- Village Building
- Village Buildings
- Calm Sea

Lighthouse Scene
- Rock Base

Tall Ship Scenes
- Schooner 2

Filler clouds used from all of the projects... I'll attach a pic showing you their location... ;)

Hope that helps... :)
Attachments
Cloud Filler
Cloud Filler
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: The Waterside Collection - Now Avaiable For Everyone!

Post by scottp55 »

Thanks Todd...it WILL!! :)
Yep...memories and pics of the Maritimes will always be with me!
I KNOW that's not near the upper Bay of Fundy unless it's at high tide!
Hitched and camped at Blomidon for one April(ranger let me stay in a deluxe ice fishing cabin:).
Was puzzled as heck one morning to see a bunch of specks running out on the Flats..
and then a tractor! :shock:
One morning hiking out for groceries, that "Century Farm" farmer came out to see me,
and couldn't resist asking him about that;
"Oh, just going out on Great Gramp's rock road to pitchfork fish from my weir...
I let the pigs out first to eat the clams...They're a better judge of the incoming tide than I am.
When the pigs run for shore..I better hop on the tractor so the tide doesn't get me..
Like happened to my Da once....and he never lived down!! " :) :)
26'(?) tide comes across the Flats faster than a man can jog! :)

Reminds me a bit of closest fishing harbor.
Cape-Porpoise-Fishing-Shack-Sunrise-copy.jpg
Great work! :)
and thanks!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

Post Reply