The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Gallery for samples created from Design and Make 3D Machinist or using Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by Todd Bailey »

Collection Graphics - V11 Special.jpg

Design and Make is excited to be soon releasing a brand new collection of models to the D&M store called the Waterside Collection! During the initial rollout of Vectric's V11 software release, you will have an opportunity to own it NOW at an exceptional price, only available when you purchase or upgrade to V11 of VCarve Desktop, Pro or Aspire!

Here is how it works: once you choose what software you will purchase or upgrade, you will be given the option to pick a free model project from a selection of D&M collections, one of which happens to be the new Waterside Collection. Once you choose a free project from a collection, you'll be offered a special price on that project's entire collection.

Let's not forget to mention that you can also, at this time only, pick any of the other collections, and you'll be offered a special discounted price from the D&M store offering. These deals are only available at this time so be sure to take a few minutes to browse before you move on.

Here is what is included in the Waterside Collection:

5 Model Projects, 10 assembled layouts, 5 project sheet
- Cottage Life
- Lighthouse Scenes
- Tall Ship Scenes
- Fishing Village
- Seaworthy

Waterside Collection.jpg
Click On Image To Enlarge

Again, this has not been released yet to the D&M store so if you want the collection early at its best possible price this is the only way you can get it.

For more information on the V11 release - https://www.vectric.com/upgrade

** Important Note **
Any projects or full collections acquired when purchasing or upgrading to V11 will be available for download in your V&Co account and will not be reflected in your D&M account.
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by scottp55 »

That looks really NICE Todd! :)
Just bought it( my first full Collection:)
Think there's enough .v3ms there to make similar seeming sections near me, and further North. :)
Going to have to go through 3D model assembly(Again), with all those components!
That's one of my weak points with VCP and using mainly third party models:(
Well done!
scott
Attachments
1.-top-hills.jpg
goat-island-light-house.jpg
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

wb9tpg
Vectric Wizard
Posts: 456
Joined: Tue Sep 04, 2018 2:49 pm
Model of CNC Machine: Shapeoko 3 XL

Re: The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by wb9tpg »

I purchased the Aspire 10.5 upgrade on May 6th; too bad I didn't wait.
Gary Mitchell
Kentucky, USA

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by highpockets »

wb9tpg wrote:
Fri Jul 23, 2021 6:57 pm
I purchased the Aspire 10.5 upgrade on May 6th; too bad I didn't wait.
I think you'll get a free upgrade, check your Vectric Portal, if not there ask support@vectric.com
John
Maker of Chips

wb9tpg
Vectric Wizard
Posts: 456
Joined: Tue Sep 04, 2018 2:49 pm
Model of CNC Machine: Shapeoko 3 XL

Re: The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by wb9tpg »

highpockets wrote:
Fri Jul 23, 2021 6:59 pm
wb9tpg wrote:
Fri Jul 23, 2021 6:57 pm
I purchased the Aspire 10.5 upgrade on May 6th; too bad I didn't wait.
I think you'll get a free upgrade, check your Vectric Portal, if not there ask support@vectric.com
I got the V11 for free but didn't see nothing about the collection as part of the upgrade.
Gary Mitchell
Kentucky, USA

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by highpockets »

If there isn't a link on the front page of your Portal contact support@vectric.com
John
Maker of Chips

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by scottp55 »

The entire Collections weren't free Gary.
They were split into sections where you could pick One free one,
OR get one entire collection at a reduced price($75USD plus state tax).
Think I'd contact Support like John said.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

jdonaldson
Vectric Apprentice
Posts: 68
Joined: Tue Mar 02, 2010 10:46 pm
Model of CNC Machine: Camaster Stinger Epilog Aspire
Location: Austin TX

Re: The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by jdonaldson »

I guess i overlooked the spot where i could by the
complete waterside collection for 75.00 when i upgraded
to Aspire V11. Is it still available even though i did get the
free model

Thanks

John

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: The NEW Waterside Collection - Special Price When Upgrading or Purchasing V11

Post by highpockets »

jdonaldson wrote:
Tue Jul 27, 2021 6:53 pm
I guess i overlooked the spot where i could by the
complete waterside collection for 75.00 when i upgraded
to Aspire V11. Is it still available even though i did get the
free model

Thanks

John
Contact Vectric Support
John
Maker of Chips

Post Reply