Introducing our latest Hack of the Week Model Project
Hack of the Week No.220
https://store.designandmake.com/shop/product/19750
Peace, Love & Country Music!!!
Country music is loved by folks worldwide with fans not only listening but writing and performing their future hits! Even if you play around a campfire, this would have a place in your house! Easily customized with country music sayings, your favorite artist's name or song you can't live without!
or
If the included Assembled Layout is not just quite right, you have all you need to make it your own. Recreate the bits you like using the single models included in the hack and then add in some of your own!
4 models, 1 assembled layout, 1 Project Sheet. All offered in .V3M format for VCarve Pro 8, VCarve Desktop or Aspire.
Remember, all the models in this pack can be cut as individual models or combined with other models in your library.
=========================================
Browse all of our Hack of the Week Model Projects... https://store.designandmake.com/search/search/?q=HOTW
To see the newest hacks be sure to select "What's New" from the "Sort" dropdown.
Check out what other Design and Make users have been up to - http://designandmakeit.com/index.php/ca ... mer-focus/
Don't forget to follow us on:
FB - https://www.facebook.com/designandmakeit
Instagram - https://www.instagram.com/designandmakeit/
Twitter - https://twitter.com/DesignAndMakeIt
Peace, Love & Country Music - Hack of the Week No.220
Moderator: Todd Bailey
- Todd Bailey
- Vectric Staff
- Posts: 624
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Peace, Love & Country Music - Hack of the Week No.220
- Attachments
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Peace, Love & Country Music - Hack of the Week No.220
As a right handed guitar player I wish you had saved the guitar model with the pickguard below the soundhole instead of above. I have fixed it on my copy after I purchased and downloaded the project. <wink>
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Todd Bailey
- Vectric Staff
- Posts: 624
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Peace, Love & Country Music - Hack of the Week No.220
Hey Randy...
Sorry about that! Yes, I will get in and fix that... thanks for pointing that out. Once I have a new installer ready I'll let you know so you can re-download the project.
Also, I will let anyone else know that has purchased it to do the same.
Thanks again...
Sorry about that! Yes, I will get in and fix that... thanks for pointing that out. Once I have a new installer ready I'll let you know so you can re-download the project.
Also, I will let anyone else know that has purchased it to do the same.
Thanks again...
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
- Todd Bailey
- Vectric Staff
- Posts: 624
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Peace, Love & Country Music - Hack of the Week No.220
Hey Randy...
Again thank you for pointing that out. If you like you can log back into your D&M account and download the new installer for the project you will find we have added in a second pre-assembled layout with the update.
I have to say well done for noticing and then using the included single models to recreate the layout!
Keep safe!
Again thank you for pointing that out. If you like you can log back into your D&M account and download the new installer for the project you will find we have added in a second pre-assembled layout with the update.
I have to say well done for noticing and then using the included single models to recreate the layout!
Keep safe!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Peace, Love & Country Music - Hack of the Week No.220
Thanks!
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop