Tree Picture Frame

Gallery for samples created from Design and Make 3D Machinist or using Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
Creation in Wood
Vectric Wizard
Posts: 856
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
Location: Monument, Colorado USA

Tree Picture Frame

Post by Creation in Wood »

My granddaughter purchased a painting with tree's and her mother ask if I would make a frame for the painting for her birthday. The frame needed to be 36" x 46" and shipped to Houston, TX. I decided to use Miter Bolts and domino's at each miter joint so that her dad could assemble the frame.
Wood; Mahogany
Frame width 8"
Clip Art; D & M
Attachments
Tree Picture Frame - Picture.jpg
Tree Picture Frame 4.jpg
Miter Bolt Joint_edited-1.jpg
Tree Picture Frame 2_edited-1.jpg
Thank You
Doug

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Tree Picture Frame

Post by highpockets »

Beautiful work Doug! She's going to love it....

Thanks for sharing....
John
Maker of Chips

User avatar
Creation in Wood
Vectric Wizard
Posts: 856
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
Location: Monument, Colorado USA

Re: Tree Picture Frame

Post by Creation in Wood »

Thanks John
Thank You
Doug

User avatar
gkas
Vectric Wizard
Posts: 1450
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: Tree Picture Frame

Post by gkas »

That is one nice frame.... I'll have to try those miter bolts. They look like they'll do the job. Do you use just the bolts, or add glue?

User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: Tree Picture Frame

Post by Todd Bailey »

Looks FANTASTIC!!!! Thanks for sharing!!!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

User avatar
Creation in Wood
Vectric Wizard
Posts: 856
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
Location: Monument, Colorado USA

Re: Tree Picture Frame

Post by Creation in Wood »

I used one Miter Bolt and two Domino's at each joint. I sent some Type II glue with the K/D frame so her dad could add glue to the joint. The Domino's keep the joint lined up so that it can not twist.
Thank You
Doug

User avatar
Creation in Wood
Vectric Wizard
Posts: 856
Joined: Thu May 28, 2015 8:58 pm
Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
Location: Monument, Colorado USA

Re: Tree Picture Frame

Post by Creation in Wood »

Thanks Todd
Thank You
Doug

Post Reply