Rod Of Asclepius cribbage board

Gallery for samples created from Design and Make 3D Machinist or using Design & Make projects

Moderator: Todd Bailey

Post Reply
whitefishwooworker
Posts: 16
Joined: Sun Nov 30, 2014 4:46 pm
Model of CNC Machine: Shopbot Buddy Standard 48

Rod Of Asclepius cribbage board

Post by whitefishwooworker »

Cribbage board made from hard maple with crushed abalone shell inlays, shop turned pegs, and Rod Of Asclepius carving. Finished with lacquer.
IMG_3213.jpg
IMG_3225.jpg
IMG_3234.jpg
IMG_3240.jpg

User avatar
dwilli9013
Vectric Wizard
Posts: 1237
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Rod Of Asclepius cribbage board

Post by dwilli9013 »

Very Nice the Inlay really sets it off. Thanks for sharing.
D-Dub
Dwayne
Dwilli

User avatar
Todd Bailey
Vectric Staff
Posts: 621
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: Rod Of Asclepius cribbage board

Post by Todd Bailey »

Nice looking finished board!!! Well done!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

User avatar
mikeacg
Vectric Wizard
Posts: 659
Joined: Sun Nov 02, 2008 10:53 pm
Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
Location: Newberry, MI
Contact:

Re: Rod Of Asclepius cribbage board

Post by mikeacg »

Beautiful board and that inlay is fantastic! Is it hard to do? Perhaps you would consider doing a little write-up of something like that! I'd really like to use inlay on some of my projects...

Mike :)

User avatar
SteveNelson46
Vectric Wizard
Posts: 2275
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: Rod Of Asclepius cribbage board

Post by SteveNelson46 »

I have made a lot of cribbage boards but none as nice and detailed as yours. You do very nice work.
Steve

Post Reply