Smokehouse Sign +Video CNC Project Hack

Gallery for samples created from Design and Make 3D Machinist or using Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
Todd Bailey
Vectric Staff
Posts: 621
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Smokehouse Sign +Video CNC Project Hack

Post by Todd Bailey »

Yesterday was Monday...

Hack of the Week No.51 got posted with a 5min video showing the breakdown of this smokehouse sign. If you have a few minuets and are interested in how we set up the layout, you just might want to read through the Shop Notes post and watch the video.
Hack of the Week No.51
Hack of the Week No.51
http://designandmake.com/blog/2015/4/27 ... no51-video

Don't know what a Design and Make CNC Project Hack is or interested in seeing more of our hacks? Check out our "Hack of the Week" page - http://designandmake.com/hacks/

If you want to catch up on any videos you may have missed we have just added a Video page to the site.
All New - Design and Make Video Page
All New - Design and Make Video Page
http://designandmake.com/videos/
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

Post Reply