Welcome.
That file is created with a trial version of the software so only you (or Vectric) can open it.
Could you post a screenshot instead?
Search found 14285 matches
- Mon Jan 14, 2013 6:39 pm
- Forum: VCarve - General
- Topic: Wondering if I should get Cut3D or Vcarve pro?
- Replies: 7
- Views: 2894
- Mon Jan 14, 2013 6:13 pm
- Forum: Cut2D - General
- Topic: Generic Vector Data - Import
- Replies: 1
- Views: 1940
Re: Generic Vector Data - Import
The easiest one to use would be the DXF (http://images.autodesk.com/adsk/files/acad_dxf0.pdf) file format. There are lots of examples of converting to it from point data such as you have on the 'net.
Google for "CSV to DXF" as that's probably the most common one.
Google for "CSV to DXF" as that's probably the most common one.
- Mon Jan 14, 2013 6:08 pm
- Forum: PhotoVCarve - General
- Topic: Lithophane Raster Lines
- Replies: 18
- Views: 8598
Re: Lithophane Raster Lines
How do you know that background is solid black? What the eye sees isn't the same as what a program sees. I expect there are some variations of shade.
- Mon Jan 14, 2013 5:33 pm
- Forum: VCarve - Tips and Tricks
- Topic: DFX file problems
- Replies: 9
- Views: 4845
Re: DFX file problems
I'm presuming you're not really using a piece of material 600in x 400in? Your problem may simply be a resolution issue with the preview with such a large material area compared to the size of the part. I reduced the material size and down and it all looked ok with a profile toolpath. The vectors loo...
- Sat Jan 12, 2013 10:06 pm
- Forum: Aspire - General
- Topic: Shop built rotary attachment
- Replies: 6
- Views: 2961
- Sat Jan 12, 2013 6:51 pm
- Forum: VCarve - General
- Topic: How to make corrections or delete toolpath after preview
- Replies: 2
- Views: 1221
Re: How to make corrections or delete toolpath after preview
Welcome. If you want to change the type of a toolpath completely (from profile to pocket) then you will have to delete the toolpath and create a new one. If you want to change some details of an existing toolpath then you can edit it by double clicking on it in the list or highlighting it and clicki...
- Sat Jan 12, 2013 4:52 pm
- Forum: VCarve - General
- Topic: Lining things up.
- Replies: 2
- Views: 1820
Re: Lining things up.
Look at the Array Copy (Block Copy) tool on page 75 (v6.5) of the Help. That will do exactly what you're looking for.
- Sat Jan 12, 2013 10:36 am
- Forum: Hardware related questions
- Topic: Spindle ?
- Replies: 28
- Views: 14963
Re: Spindle ?
8 amp seems very low for a 2hp spindle on 230v. My 2.2hp one needs a 20 amp connection and a friend of mine has a Chinese 2hp one that we had to hook up to a 16 amp breaker.
- Thu Jan 10, 2013 11:08 am
- Forum: Hardware related questions
- Topic: Spindle ?
- Replies: 28
- Views: 14963
Re: Spindle ?
Is there a display on the front of the inverter? If there isn't a setting to directly display RPM's it should display the frequency and you should be able to calculate the RPM from there.
- Thu Jan 10, 2013 10:21 am
- Forum: Cut2D - General
- Topic: How to locate workpiece on material as I like ?
- Replies: 2
- Views: 2279
Re: How to locate workpiece on material as I like ?
Usually you would do that in your control software (Mach3 etc) not in Cut2D. You can either move the machine to where you want to start and set the XY zero to that position and cut as normal. Or (if your control software supports it) set it to offset mode so it treats the current position as the XY ...
- Thu Jan 10, 2013 10:03 am
- Forum: VCarve - General
- Topic: Please help i lost my V Carve pass code for the program
- Replies: 14
- Views: 4986
Re: Please help i lost my V Carve pass code for the program
Don't forget that Vectric is a UK based company. You're not likely (although it has been known!) to get replies in the small hours of the morning.
- Tue Jan 08, 2013 5:10 pm
- Forum: VCarve - General
- Topic: True Type or Single Line?
- Replies: 2
- Views: 2299
Re: True Type or Single Line?
It only works with True Type fonts as far as I know as it needs a closed vector which the single line fonts aren't.
- Tue Jan 08, 2013 10:24 am
- Forum: Aspire - Tips and Tricks
- Topic: creating new tool lists
- Replies: 3
- Views: 2161
Re: creating new tool lists
If you mean the drop down list that appears when adding a new tool then no that can't be added to.
I'm not sure why you would want to as you can call the actual tool anything you want so I might be misunderstanding the question.
I'm not sure why you would want to as you can call the actual tool anything you want so I might be misunderstanding the question.
- Tue Jan 08, 2013 10:21 am
- Forum: Aspire - General
- Topic: 3-d in reverse
- Replies: 5
- Views: 2909
Re: 3-d in reverse
Be careful when making moulds that you're not breaching the license agreement for the 3D files you're using.
http://www.vectric.com/forum/viewtopic.php?f=9&t=8316
http://www.vectric.com/forum/viewtopic.php?f=9&t=8316
- Mon Jan 07, 2013 9:46 pm
- Forum: Post Processors
- Topic: Laser Control
- Replies: 15
- Views: 13722
Re: Laser Control
Have you looked at the Post Processor editing guide on the VCarve Help menu? I don't know what actual commands you would need to control the laser but the guide will explain how and where to add them.