Search found 32 matches
- Thu Nov 12, 2009 1:40 pm
- Forum: Aspire - Tips and Tricks
- Topic: Can't Generate Toolpath Error
- Replies: 7
- Views: 2994
Re: Can't Generate Toolpath Error
I get this quite frequently. I change the lines to curves. Select the line then - Fit Curves to Vector/ Bezier Curves. This usually fixes the problem. I usually get this error after making the 'Make profile toolpath' then going back to fix problems, usually size. After resizing or other fix, I go ba...
- Tue Oct 20, 2009 12:58 pm
- Forum: Aspire - General
- Topic: Error opening a file
- Replies: 3
- Views: 2091
Re: Error opening a file
Thanks for the replys I saved it as normal - to the hard drive. I tried to open it both by double click from file location, and from the file open function in Aspire. This wasn't the first time I opened and saved the file. I had worked on it for awhile and then went back to open it the next day and ...
- Mon Oct 19, 2009 10:59 am
- Forum: Aspire - General
- Topic: Error opening a file
- Replies: 3
- Views: 2091
Error opening a file
I am getting this error while trying to open a file. I have Aspire 2.015; This is the same program that the file was generated in, saved in but failed to open. I sent it off to Vectric a couple of weeks ago, but have not heard back from them and thought maybe someone here would know what this is or/...
- Fri Oct 16, 2009 2:05 pm
- Forum: Aspire - Tips and Tricks
- Topic: Glazing your 3D Carving - A Step by Step Guide
- Replies: 45
- Views: 211308
Re: Glazing your 3D Carving - A Step by Step Guide
Thanks for the tutorial.
Here is my first attempt at detailed glazing.
I appreciate the effort you put into this pdf.
thks
Butch
Here is my first attempt at detailed glazing.
I appreciate the effort you put into this pdf.
thks
Butch
- Sat Oct 10, 2009 1:34 pm
- Forum: Aspire - General
- Topic: File Failed to Open - Code 3
- Replies: 2
- Views: 1840
Re: File Failed to Open - Code 3
Tim I have version 2.015..or so it says in the help file. Other files I made the same day work fine. I tried to open from the file - double click and from inside Aspire with the same results. I did reboot, and nothing changed. Only thing I can think of is that the file became corupted, but how and w...
- Sat Oct 10, 2009 12:43 pm
- Forum: Aspire - General
- Topic: File Failed to Open - Code 3
- Replies: 2
- Views: 1840
File Failed to Open - Code 3
I have a file I generated in Aspire 2.015. Saved it as normal, but now I am trying to open it and I get an error message.
[File Failed to open
("****file name)
Code 3
File was written by version Aspire 2.015
This has happened a couple of times. Any idea what it is? How to fix it?
Thanks Butch
[File Failed to open
("****file name)
Code 3
File was written by version Aspire 2.015
This has happened a couple of times. Any idea what it is? How to fix it?
Thanks Butch
- Thu Aug 20, 2009 1:21 pm
- Forum: Aspire - General
- Topic: Hole size problem
- Replies: 6
- Views: 3114
Re: Hole size problem
Bruce I like to check the VU "Unit Values" when I suspect this problem. I zero at the table, then make a mark (X) at 96,48 and then Z=0 to measure where the center of the bit is at, to assure it is correct. Then the center of the table, then the other corners. If these are on, then you variables are...
- Fri Apr 10, 2009 12:34 pm
- Forum: Aspire - General
- Topic: Aspire resolution
- Replies: 1
- Views: 1286
Aspire resolution
I have noticed the detail in Aspire is less than Cut3D. I am carving the elk from Vectric. When I used VCarve Pro I had much better detail on the carvings than I am getting with Aspire. Is there any suggestions how I can get the detail back with Aspire? thks
Butch
Butch
- Mon Mar 30, 2009 12:02 pm
- Forum: Aspire - Gallery
- Topic: Elk Carving
- Replies: 1
- Views: 2297
Elk Carving
Here is a picture of the elk, using a picture of bark to hide the outline.
I do have a question...Is anyone else noticing a loss of detail using Aspire from Cut3D detail?
I do have a question...Is anyone else noticing a loss of detail using Aspire from Cut3D detail?
- Tue Feb 24, 2009 1:18 pm
- Forum: Aspire - Gallery
- Topic: Clock in the Works
- Replies: 8
- Views: 6048
Re: Clock in the Works
That is very nice. I was thinking of building a HD or HOG clock, hoping to sell to some of the Harley shops and clubs around here and Rapid City. But what you made was much better than what I was thinking of. This turned out very good. Thanks for sharing.
Butch
Butch
- Tue Dec 23, 2008 12:45 pm
- Forum: Aspire - General
- Topic: Hey Every one Happy Holidays!
- Replies: 10
- Views: 5127
Re: Hey Every one Happy Holidays!
Happy Holidays
Want to thank everyone for their posts. The ideas, suggestions and 'how-to-tips' are very helpful and interesting.
Butch
Want to thank everyone for their posts. The ideas, suggestions and 'how-to-tips' are very helpful and interesting.
Butch
- Sat Dec 06, 2008 1:26 pm
- Forum: Aspire - General
- Topic: Aspire user manual?
- Replies: 15
- Views: 10267
Re: Aspire user manual?
I printed mine out. I use a HP Photosmart C6280 printer. It doesn't take that much ink. Hard to judge, as I do so many photos, but for general printing I use normal or fast draft. Took a $10 three hole punch and $3.00 folder and made a printed manual. Even if I figure .05 cents per page (doubt it co...
- Tue Nov 25, 2008 5:12 am
- Forum: Aspire - Gallery
- Topic: Lucky's Home
- Replies: 13
- Views: 6353
Re: Lucky's Home
Well done.
I am trying to do the same thing.
How many different components did you make....2 for ears, eyes etc.?
Sure looks good.
Thanks Butch
I am trying to do the same thing.
How many different components did you make....2 for ears, eyes etc.?
Sure looks good.
Thanks Butch
- Wed Oct 29, 2008 1:02 pm
- Forum: Aspire - Gallery
- Topic: Going batty... of course
- Replies: 4
- Views: 4155
Re: Going batty... of course
[quote="moto633"] Great idea Robert! Is there any way to glue hair to it so it feels real when you touch it?? :lol: Just kidding :lol: Nice Job I would like to see it cut. Nick [/quote] Nick Actually it would be easy. Use Suede. I use DonJer Suede Tex. It is two part, a paint adhesive and felt spray...
- Wed Oct 22, 2008 8:39 pm
- Forum: Aspire - General
- Topic: Welcome to Aspire!
- Replies: 22
- Views: 15249
Re: Welcome to Aspire!
So Giddy!!! Having a hard time waiting. Almost as good as Christmas morn.....a few years ago!
Thanks
What I've seen, this is what I have been looking for from the begining of my CNC.
Butch
Thanks
What I've seen, this is what I have been looking for from the begining of my CNC.
Butch