Jan.vanderlinden.
That sign is edge lit, the led light strip is in the base... if you do a forum search for "edge lit led" you will get much info
Search found 1125 matches
- Tue Feb 07, 2017 9:52 pm
- Forum: VCarve - General
- Topic: carving from the back side
- Replies: 15
- Views: 6267
- Mon Jan 23, 2017 6:09 pm
- Forum: VCarve - General
- Topic: A bit about bits
- Replies: 14
- Views: 5831
Re: A bit about bits
I am going out on a limb here. This is my theory - I don't have time to test it right now. First - i agree the linked thread is not a fair comparison. That is a different scenerio. NOW - in actuality they both DO go to .020 deep. I posted the code for both and looked at the code and they both go to...
- Sat Jan 21, 2017 11:11 pm
- Forum: VCarve - General
- Topic: engraving with diamond bit
- Replies: 8
- Views: 3596
Re: engraving with diamond bit
Once you get suitable vectors, imported e.g. EPS, drawn or bitmap trace, use either "profile on" as mentioned or the "quick engrave" feature, both will create toolpaths for the open vectors
- Sat Dec 24, 2016 6:12 pm
- Forum: VCarve - General
- Topic: VCP8.5 with a mill
- Replies: 18
- Views: 8013
Re: VCP8.5 with a mill
Assuming you have minimal backlash and steps per unit is calibrated correctly you will probably need to rough machine more critical parts such as bearing bore pockets undersize or oversize depending on desired slip or press fit and achieve final accuracy by using a series of very light finish passes...
- Sat Dec 24, 2016 4:04 pm
- Forum: VCarve - General
- Topic: VCP8.5 with a mill
- Replies: 18
- Views: 8013
Re: VCP8.5 with a mill
http://paladintechworks.com/index.php/home/blog/12-tech/14-understanding-the-terms-precision-repeatability-and-accuracy-in-the-cnc-world When I built my router I used AC servos with 16bit encoders (10160.0203 steps per w/reduction) and new surplus precision double nut ball screws mapped to 12 micron...
- Sat Dec 24, 2016 1:50 pm
- Forum: VCarve - General
- Topic: VCP8.5 with a mill
- Replies: 18
- Views: 8013
Re: VCP8.5 with a mill
So I tried a search to see if this has already been asked a few dozen times, did not see any close matches so here goes. I know Vcarve is based around cutting wood signs and general CNC woodworking. Has anyone used it on designs that would be machined from metal on a mill and not a router? I've alr...
- Fri Dec 23, 2016 6:12 pm
- Forum: VCarve - General
- Topic: Nose Dive
- Replies: 22
- Views: 8071
Re: Nose Dive
Leo, Does any of this account for the collet hitting work assuming there is no hole in blank and the cutter had sufficient stick out? I also generally profile from top of work with 3d models (air cut), of course I'm one of the few with a Z- limit switch adjusted slightly below work, saved me from hu...
- Fri Dec 23, 2016 2:48 pm
- Forum: VCarve - General
- Topic: Nose Dive
- Replies: 22
- Views: 8071
Re: Nose Dive
how much cutter length exposed ?
- Tue Dec 20, 2016 6:51 pm
- Forum: VCarve - Gallery
- Topic: Paradise Boxes revisited
- Replies: 9
- Views: 4415
Re: Paradise Boxes revisited
Pretty work!, Martin
- Mon Dec 19, 2016 1:10 am
- Forum: Aspire - Tips and Tricks
- Topic: is this graphic usable for vectors ?
- Replies: 13
- Views: 7381
Re: is this graphic usable for vectors ?
glenninvb wrote: traced graphic and added text, change if you wish, hope it gets ya started More than started, looks ready to cut to me thanks mezalick did all the work just added a couple arcs, circles and lines. Took longer to reply, and I always misspell restaurant (better check :oops: ) don't fo...
- Sun Dec 18, 2016 8:29 pm
- Forum: Aspire - Tips and Tricks
- Topic: is this graphic usable for vectors ?
- Replies: 13
- Views: 7381
Re: is this graphic usable for vectors ?
traced graphic and added text, change if you wish, hope it gets ya started
- Thu Dec 15, 2016 10:33 pm
- Forum: VCarve - General
- Topic: Tool DB - Entering a roundover bit as?
- Replies: 8
- Views: 3417
Re: Tool DB - Entering a roundover bit as?
you can just draw a circle and delete three sections...
- Thu Dec 15, 2016 5:13 pm
- Forum: Aspire - Tips and Tricks
- Topic: Source for dust boot brush strip
- Replies: 5
- Views: 4247
Re: Source for dust boot brush strip
The easy cut brush with the #1 holder work great, inexpensive and available in 1-3"
If you make a couple magnetic bases using 1" and 3" length, they will accommodate most length cutters
about 3/4 down page
https://www.mcmaster.com/#conveyor-stri ... s/=15hb0f8
If you make a couple magnetic bases using 1" and 3" length, they will accommodate most length cutters
about 3/4 down page
https://www.mcmaster.com/#conveyor-stri ... s/=15hb0f8
- Thu Dec 15, 2016 2:54 pm
- Forum: VCarve - General
- Topic: help etching glass
- Replies: 8
- Views: 4307
Re: help etching glass
I might be mistaken but if I look at this video, it seems that these guys engrave on glass with a “normal” 60 Deg V bit. :shock: https://www.youtube.com/watch?v=MLJcoPtGlbA Agree with your :shock: :shock: :shock: ... sounds barbaric .. and ya probably shouldn't breath the dust :? Here's another vid...
- Wed Dec 14, 2016 9:49 pm
- Forum: Aspire - General
- Topic: Guitar Neck Heel Question
- Replies: 14
- Views: 8715
Re: Guitar Neck Heel Question
I am still looking for a model of the back of a guitar neck that I can use on a three string cigar box guitar neck. Any help would be great. Type in Cigar Box Guitar and the search bar. Lots of info as of late and a wealth of knowledge as well. Looking at your original post, a one piece body and in...