opps
Cedar or Maple depends on the thickness. I just want to test this out before I do an actual one.
Seabreezr
Search found 104 matches
- Wed Mar 11, 2015 12:35 pm
- Forum: Cut2D - General
- Topic: Support Pages and Frequently Asked Questions
- Replies: 223
- Views: 2990602
- Wed Mar 11, 2015 12:33 pm
- Forum: Cut2D - General
- Topic: Support Pages and Frequently Asked Questions
- Replies: 223
- Views: 2990602
Re: Support Pages and Frequently Asked Questions
Hi, thank you for responding,
it will be any where between .5 to .75 or thinner if I could make it.
it will be any where between .5 to .75 or thinner if I could make it.
- Tue Mar 10, 2015 12:26 pm
- Forum: Cut2D - General
- Topic: Support Pages and Frequently Asked Questions
- Replies: 223
- Views: 2990602
Re: Support Pages and Frequently Asked Questions
Hello all, I was wondering about tilling. If I cut the pieces and than glue them in, how well would this stay if each piece is about 18" long and at least 13" wide and the total would be 5' long? I was thinking about gluing a same size thin piece underneath to make it stable, but the edges would be ...
- Wed Dec 24, 2014 7:45 pm
- Forum: VCarve - General
- Topic: Merry Christmas and a Happy New Year!
- Replies: 21
- Views: 11741
Re: Merry Christmas and a Happy New Year!
Thank you all,
You all look great. Merry Christmas to you all as well and Happy New Years.
Seabreezr
Donna
You all look great. Merry Christmas to you all as well and Happy New Years.
Seabreezr
Donna
- Thu Oct 09, 2014 6:23 pm
- Forum: VCarve - General
- Topic: 3d sign
- Replies: 2
- Views: 1999
Re: 3d sign
Thank you, yes you did get it and I will sure try.
Thank you again,
Seabreezr
Thank you again,
Seabreezr
- Wed Oct 08, 2014 6:50 pm
- Forum: VCarve - General
- Topic: 3d sign
- Replies: 2
- Views: 1999
3d sign
Hi all, I have a Question. I am making a 3d sign with fonts above my 3d.. how can I make my fonts not stick out just flat on board while my 3d is sticking out?? I did do just my 3d part looks funny with half carved and my letters not. Hope this makes since .. I do not want my words deep as my 3d ......
- Thu Sep 25, 2014 1:10 am
- Forum: VCarve - Tips and Tricks
- Topic: Party tray
- Replies: 15
- Views: 11118
Re: Party tray
I hate to bother you all again and yes Dale, what is the difference between a ball nose and a round nose? I do have a ball nose 1/8th and 1/4 but I know I need a 1/2 round nose and not a ball nose?
Thank you again have a great night again,
Seabreezr
Thank you again have a great night again,
Seabreezr
- Thu Sep 25, 2014 12:28 am
- Forum: VCarve - Tips and Tricks
- Topic: Party tray
- Replies: 15
- Views: 11118
Re: Party tray
Oh I actually got it Dale, I went to the toolpath and guess what was there? thank you so much for your time Dale and of course your patience
your work is just fantastic. I am sure I will be writing to you again just to let you know how I did
Have a wonderful night,
Seabreezr (Donna)
your work is just fantastic. I am sure I will be writing to you again just to let you know how I did
Have a wonderful night,
Seabreezr (Donna)
- Thu Sep 25, 2014 12:25 am
- Forum: VCarve - Tips and Tricks
- Topic: Party tray
- Replies: 15
- Views: 11118
Re: Party tray
Dale,
I was able to get on vcp and it does say tray but there was no tray on vcp just a blank square. Am I doing something wrong.. Evidently there were some downloads I guess with no problems??
Seabreezr
I was able to get on vcp and it does say tray but there was no tray on vcp just a blank square. Am I doing something wrong.. Evidently there were some downloads I guess with no problems??
Seabreezr
- Wed Sep 24, 2014 1:23 pm
- Forum: VCarve - Tips and Tricks
- Topic: Party tray
- Replies: 15
- Views: 11118
Re: Party tray
Good morning Dale,
Thank you so much for your time want you to know I do appreciate that very much.. I dont have aspire yet. Some day hoping. I do have VCP if you dont mind reposting that for VCP...
Thank you again and have an awesome day
Seabreezr
Thank you so much for your time want you to know I do appreciate that very much.. I dont have aspire yet. Some day hoping. I do have VCP if you dont mind reposting that for VCP...
Thank you again and have an awesome day
Seabreezr
- Tue Sep 23, 2014 10:01 pm
- Forum: Aspire - Gallery
- Topic: Wooden Heart
- Replies: 16
- Views: 9799
Re: Wooden Heart
Hi Alan,
Very nice work you did a great job. I was wondering would you like to share a template? or how you did that?
Hope I didn't offend you by asking. that's a compliment and have a great night.
Thank you,
Seabreezr
Very nice work you did a great job. I was wondering would you like to share a template? or how you did that?
Hope I didn't offend you by asking. that's a compliment and have a great night.
Thank you,
Seabreezr
- Tue Sep 23, 2014 12:47 pm
- Forum: VCarve - Tips and Tricks
- Topic: Party tray
- Replies: 15
- Views: 11118
Re: Party tray
good morning. Thank you so much for your replies it is well appreciated. I think I'm going to do that Glue Together.. I have a router that only has a 1/4" shank. I a cnc shark.. is that still possible and it probably take forever? Can I get a 1/2" bit w this small shank? Hopefully I make since.. :D ...
- Tue Sep 23, 2014 12:59 am
- Forum: VCarve - Tips and Tricks
- Topic: Party tray
- Replies: 15
- Views: 11118
Re: Party tray
Dheller I meant those are so beautiful. Im sure you are too
rscrawford, hey I know someone that was in the military named Crawford hmmm.. Anyways. what you mean even if machine is off? and you mean gluing layers? Thank you
Seabreezr
rscrawford, hey I know someone that was in the military named Crawford hmmm.. Anyways. what you mean even if machine is off? and you mean gluing layers? Thank you
Seabreezr
- Mon Sep 22, 2014 9:19 pm
- Forum: VCarve - Tips and Tricks
- Topic: Party tray
- Replies: 15
- Views: 11118
Re: Party tray
OMG, yes I sure do :wink: Your are so beautiful. One way I was thinking of making them is just by 2" thick and cut out, or do 2 cut outs (or however many)but I was trying that and it seem to not fit. I am sure I am doing it wrong badly lol.. Can you help a poor helpless soul?? I do appreciate this. ...
- Mon Sep 22, 2014 6:25 pm
- Forum: VCarve - Tips and Tricks
- Topic: Party tray
- Replies: 15
- Views: 11118
Re: Party tray
Oops I guess thats what I get for being in a hurry..
When I said 2 or 5 I meant that the trays have say 2 sections to hold food or snacks in.. like you see one wirh 5 trays round and the Middle is small maybe for dip or whatever.
Thank you
Seabreezr
When I said 2 or 5 I meant that the trays have say 2 sections to hold food or snacks in.. like you see one wirh 5 trays round and the Middle is small maybe for dip or whatever.
Thank you
Seabreezr