Vectric Customer

Guys

Checkout this thread on TDPRI.com . Lots of good info. Also info on a velcro clothspin tensioner

http://www.tdpri.com/forum/tele-home-de ... build.html

Ed

JimmyD wrote:What would you like to know about the gear drive?

Not really sure. Have an old wood lathe that I think would be able to be used.

Ed

Any more details available for the gear drive?

Ed

Are you installing it as Administrator?

Ed

The body from a pop rivet?

Ed

Paul

To bad they didn't get the finishing option. Could of printed out a 12 pack complete with case. no need to cradle the bottles in his arms.

Blondchief

A wide format copier with a scan option would work. I used to work for a copier company an their scanner was capable of scanning 36 inches by 40 feet. I think they can create jpeg and tiff files.

Ed

Not sure what you're trying to accomplish with the first 2 tool paths but they are very close to the edge. Everything else looks good but you you don't cutout the 2 square shaped parts. Only one edge.

Ed

Graffix11

Check out Ken Dolph's site. Located near Buffalo

https://sites.google.com/site/coriartinc/

Ed

Thanks Paul

The online help file for Vcarve does show the resolution option. Also found it in the trial Aspire program..

Also saw you were thinking of welding up a new base for your machine. Give me a shout if you need help with the welding.

Ed

Hi

I would like to adjust the modeling resolution in the job setup screen but the option is not there. I searched the help file and it should be at the bottom but it's not. Any idea how I can turn this on?

Ed

I would think the cable should be straight through. Crossover cables are usually used to connect two terminals or computers so they can talk to each other. Straight cable are used to connect a terminal to an output device . Usually in a straight cable pin 2 at one end is connected to pin 3 at the ot...

Paul

Have you checked out Peter's 4th axis build?



Ed

Would Paul's gadget work to edit the start points?

http://forum.vectric.com/viewtopic.php?f=2&t=19117

Ed

Dave said Thanks but I'm not looking to change the actual tool on the machine, I'm looking to change all the settings for a specific tool in VCarve. I think you could duplicate the tool you want to use, make the setting changes, and save it as another tool number. Then you could use the settings you...