Vectric Customer

Okay I am on the correct thread this time. I have a new gadget! In the morning I will head to the shop to start testing. and then I will test some more. Main.png I tried to add as much functionality so that most everyone can use the gadget if they have a 4th axis. On the top is a Header and Footer b...

Sorry Wrong Thread

Rcnewcomb wrote: ↑

Fri Jan 19, 2024 12:13 am

Would anybody be interested, if I finished out the code with a graphical user interface?

I can certainly test it. I've been writing this by hand for years.

I will get on it...

Hi Guys and Girls, I hope all of you are safe and warm. I am about 80% done with a Gadget to makes this toolpath. About a year or so ago, I had to make a bunch of table legs to turn from square stock to round stock. So I bang out the core code (no graphical user interface) and I manually enter the v...

Hello All, I hope each of you are staying warm... Winter has found Houston Texas. I found and fixed and small issue in the Easy Cabinet maker gadget. Here is the updated version. Item Fixed: 1. Base cabinet logic - When using a half-blind dado and "No center panel" the code did not notch the corners...

That is so cool.

Hello All, I hope each of you are having a super day. I added a new option to the Easy Cabinet Maker gadget. Item Added: 1. Wall cabinet Top and Bottom panel, can now be set to be milled as a Dado or a Rabbet joint. Before you could only have Rabbet joints. Current Version: 17.0 Supports: 11.0+ vers...

Is the there a way to do dados for the tops and bottoms on upper cabinets 3/4" to a 1" up or down in from the end instead of rabbits on end of the side panels Thanks Donavan Hello Donavan, Yes, I write custom gadgets. Send me an email with a drawing of what you are needing at Jim@Jimandi.com

First off thanks for all of the work you do I installed Ver 16.9 and getting a error message cannot open EasycabinetLibrayver16.9.xlua no such file or directory when i look at the file directory the files have name ver116.9 on them instead ver16.9. Can i just rename them? Donavan Hello All, I hope ...

I will have a look.

Hello All, I hope each of you are having a great day. I address an issue with the Easy Cabinet Maker gadget. Item Fixed: 1. Wall cabinet side panel, the back panel dado was the wrong width Current Version: 16.9 Supports: 11.0+ version of 2D Cut Pro, VCarve Pro, and Aspire Installation Instructions: ...

Working on it...

this is about dados in Easy Cabinet Maker not sure why i would post this too Dovetail thread??? help with dados my dados are not the same on the sides compared to the tops and bottoms I want 1/4" backs with 3/4" nailers, the side panels are right 1/4" dado 3/4" from the back but the tops and bottom...

help with dados my dados are not the same on the sides compared to the tops and bottoms I want 1/4" backs with 3/4" nailers, the side panels are right 1/4" dado 3/4" from the back but the tops and bottoms a 3/4" dado 1/4" from the back for a captured backs. When i do rabbited or flat mounted it is ...