That is with Aspire 12.004sircarveabit wrote: ↑Tue Apr 16, 2024 7:37 pmMight be an Aspire thing then. I will re-post this within the Aspire group. Thank you for your feed back.
Search found 14314 matches
- Tue Apr 16, 2024 8:04 pm
- Forum: VCarve - General
- Topic: VCarve Version 12 is OUT NOW 🎉
- Replies: 25
- Views: 2105
Re: VCarve Version 12 is OUT NOW 🎉
- Tue Apr 16, 2024 5:52 pm
- Forum: VCarve - General
- Topic: VCarve Version 12 is OUT NOW 🎉
- Replies: 25
- Views: 2105
Re: VCarve Version 12 is OUT NOW 🎉
I'm not seeing that. All three options are behaving identically with 12.004. Even when pasting vectors copied from 11.5.
- Tue Apr 16, 2024 4:18 pm
- Forum: VCarve - General
- Topic: VCarve Version 12 is OUT NOW 🎉
- Replies: 25
- Views: 2105
Re: VCarve Version 12 is OUT NOW 🎉
Cut. Copy and Paste can be accessed by right clicking in the main windows and choosing from the menu or using Ctrl-C, Ctrl-X and Ctrl-V.
You can't add the icons for those back in.
You can't add the icons for those back in.
- Tue Apr 16, 2024 1:55 pm
- Forum: VCarve - General
- Topic: phantom hole punch
- Replies: 11
- Views: 306
Re: phantom hole punch
My apologies. I toggled the two layers when I screenshot the cutfile. Layer 0 is empty (as far as I can see). Layer 0 generates automatically for all files I import to v-carve. I am attaching the original dxf./.crv for clarity. Your input is greatly appreciated :D With that file and following Marks...
- Tue Apr 16, 2024 1:22 pm
- Forum: VCarve - General
- Topic: V12 Line Resolution
- Replies: 9
- Views: 323
- Tue Apr 16, 2024 8:47 am
- Forum: VCarve - General
- Topic: Grbl in trial version
- Replies: 14
- Views: 493
Re: Grbl in trial version
I would love to see the software interface with the actual machine someday. Until then, I'll be using Candle - or just dumping gcode directly to the machine's interface. VCarve comes with a program called vTransfer which I believe does what you want. I might be wrong though as I used a more "tradit...
- Mon Apr 15, 2024 8:48 pm
- Forum: VCarve - General
- Topic: Vcarve pro V11.5 and 12 not finishing
- Replies: 4
- Views: 228
Re: Vcarve pro V11.5 and 12 not finishing
60 to 70% through the roughing toolpath? Previews correctly in VCarve? Any messages on your controller software? Is the gcode file complete?
- Mon Apr 15, 2024 6:35 pm
- Forum: VCarve - General
- Topic: Saving Toolpaths
- Replies: 2
- Views: 108
Re: Saving Toolpaths
Yes you can. I do it all the time but it depends on which post processor you're using. It must support some form of tool change be it manually prompted or fully automatic.
- Mon Apr 15, 2024 6:34 pm
- Forum: Aspire - General
- Topic: Thomas the Train
- Replies: 9
- Views: 551
Re: Thomas the Train
There is a thread here - viewtopic.php?f=28&t=43132
- Mon Apr 15, 2024 3:58 pm
- Forum: VCarve - General
- Topic: V12.004 - drag and drop DXF doesn't work
- Replies: 5
- Views: 266
Re: V12.004 - drag and drop DXF doesn't work
I found with all versions that drag and drop can sometimes not work but closing and restarting VCarve fixes it. I'm sure it's a Windows issue rather than Vectric as I've had it with other programs as well.
Dragging and dropping DXF (and other files) is working fine for me in 12 as well.
Dragging and dropping DXF (and other files) is working fine for me in 12 as well.
- Mon Apr 15, 2024 3:24 pm
- Forum: VCarve - General
- Topic: phantom hole punch
- Replies: 11
- Views: 306
- Mon Apr 15, 2024 2:51 pm
- Forum: VCarve - General
- Topic: phantom hole punch
- Replies: 11
- Views: 306
Re: phantom hole punch
Hard to say 100% without seeing the actual file but it's most likely a very small vector. Zoom in on that area and/or go into node edit mode to make it a bit clearer. Assuming you're using a drill toolpath to make the holes. That works off the centre of the vector rather than the shape so a tiny str...
- Mon Apr 15, 2024 11:31 am
- Forum: Aspire - General
- Topic: v12 toolpath templates very slow.
- Replies: 6
- Views: 250
Re: v12 toolpath templates very slow.
Probably best to email support@vectric.com as it sounds like one of those issues that is particular to the combination of toolpaths etc rather than just being a general issue with toolpath templates.
- Mon Apr 15, 2024 11:22 am
- Forum: Aspire - General
- Topic: v12 toolpath templates very slow.
- Replies: 6
- Views: 250
Re: v12 toolpath templates very slow.
I'm not seeing that behaviour. I timed one of my usual 11 sheet jobs and it took pretty much the same time in both.
- Sun Apr 14, 2024 5:08 pm
- Forum: VCarve - General
- Topic: Working with converted DNW file
- Replies: 3
- Views: 130
Re: Working with converted DNW file
In that case there are no vectors as it's a component so you need the 3D roughing and finishing toolpaths rather than any of the vector based toolpaths.
Whether that is the most efficient/sensible way to cut it is hard to say without seeing it.
Whether that is the most efficient/sensible way to cut it is hard to say without seeing it.