Vectric Customer

By Engraving, I mean carving Text into it, without penetrating... Like you would with stone, or brass, or acrylic (think edge lit signs) There is a 'very' small area I can try for test carving... .04 would definitely be way too deep.. That would leave only .020 and I'm thinking that would pull out t...

also, should I leave the thin protective plastic film on it when engraving, or pull that off first?

I need to cut and engrave this stuff I got off of ebay... (link below) I generally cut plastics by using double sided tape to hold it down... The top engraving layer appears to be pretty thin, and the entire material itself is only .060 thick... The idea is to cut through the white layer on top, exp...

Awesome!

Thanks guys!
Who knew it was so easy and I had all I need already!
Finally something that doesn't cost a fortune! lol

Thanks,
Mark

Wanted to ask this group but didn't know where else to ask it here


Is it silk screen?
Some sort of computer operated paint sprayer?
I would love to add this capability if it's affordable..

http://www.relicwood.com/product/person ... psake-box/

Today is the day!

The holes are dual use on this project... I have 5/16" nuts embedded under the scarf board on a 3" x 3" grid (over 500 of them for the 4' x 8' table), with 5/16" holes drilled through the scarf board so that I can use bots for hod down cams, clips, etc. or in this case to bolt the material directly ...

Back:

My first ever (hopefully of many) guitar build is ready to cut! Introducing the 'traveler'.. lightweight and compact for camping/traveling.... This is by far the most involved project on the software side I've ever done... Especially modeling this neck in the 3D app! Anyways, I'm finally ready to cu...

It puts everything in the 'public' folder for some reason (I wish we could choose during install).... I found it there, and the 3D Tabs file.. and once I clicked on that they showed up...

Thanks,
Mark

When I download the tutorials and files for the two sided 3D leaf bowl project, and then click on the download, I'm asked for permission to install the files, it lists them as V carve Pro 8 files.. When I click okay, they are installed into the Demo version of Aspire instead of VCP8.. It gives me no...

cstwrks,

Watch this video.. It should clear up any confusion you have about 3D carving with VCP8....

http://support.vectric.com/tutorials/V8 ... _PRAC.html

Mark

Cleared the cache again and got it to play... Don't know why that didn't work the first time...

Thanks,
Mark

Updated VCP, hoping that would make the video show up in the help directory, but it didn't..

I don't know how to watch it then, if I can't get it to play past the first couple of minutes from the link you provided..

Thanks,
Mark

When I downloaded the video tutorial, and then clicked on it, it wanted to 'install' the tutorial.... So I let it, but the problem is, that it installed it into the Aspire Demo instead of VCP.. Is there any way I can install it into VCP so that I don't have to start up the demo version of aspire to ...