Vectric Customer

Hello, I am cutting a fish pattern purchased from design and make. The preview shows that it is perfect. See pictures. However on the material it is not cutting properly. It is missing detail. I have aspire most up to date version. I am completing a rounding toolpath and a roughing tool path, then a...

OK, i figured it out. I had to add a layer and put the clip art in that layer on the top. Thank you.

I am using aspire. I will try your suggestions. Thank you.

vectric, can you help with problem solving on this? can I send you the files

I am really having a hard time with the rotary. what I want to do is table legs with a clip art of a walleye (which I have). It keeps putting the clip art in the middle, which of course is not seen. Also I get the error model thickness exceed material thickness. Can anyone help me with this? I have ...

thank you...Great!

Hello everyone, I have a 88 inch project to cut. I have a 4 x 4 machine. I can cut it into two sections. But they need to
line up perfectly. Can anyone give me a topic link, or link to the tutorial on how to do this in Aspire?
Thank you
Mary

Thank you very much, now that makes sense to me.

Hi, I have a round blank that is not completely round. It's largest diameter is 5 inches and the smallest is 4.75. I would like the round blank final diameter to be 4.75. What numbers do I put in the rounding gadget to tell the machine what to do? When I enter 5 inch for the largest diameter and any...

international falls, MN

I have aspire 8.5, I am working with 3 d models but want to start the cutting tool path in the center of the model. I have set the "material set up" in the middle. However the program may start cutting in the middle, but then jumps to the outside where the cut depth is 1.3. This is hard on my tools....

Thank you Norm and Scott, the piece I am cutting will be 40 x 36 . I am going to try a sample with your recommendations. I will let you know how it works out.

Mary

better picture of map

Hi, I am making the map attached, using a 0.0625 bn bit. I am concerned that the bit is to big for the detail.

For example where there are lanes in the road the bit may eat into the lane divider.

Should I use a different bit? engraving bit?

Suggestions please.

thank you, I really enjoy wood working. It is truly an art. I appreciate your time.