James....
As always, Your the Best !!
Thanks for the files...
Paul N
Search found 244 matches
- Wed Aug 26, 2009 10:29 pm
- Forum: Design & Make Clipart- General
- Topic: Top Secret (Until Tomorrow)
- Replies: 13
- Views: 7259
- Mon Aug 24, 2009 9:25 pm
- Forum: Aspire - Gallery
- Topic: Madonna & Child Plaque.
- Replies: 3
- Views: 2746
Re: Madonna & Child Plaque.
Thanks Tim.... I think Spanish Cedar is in the Mahogany family. There is a company close by that builds wood doors, and they let me pickup cutoffs... They use both the cedar and mahogany in the large doors they make. I've found it cuts better going cross grain, at a higher RPM works best on my table...
- Mon Aug 24, 2009 8:13 pm
- Forum: Aspire - Gallery
- Topic: Madonna & Child Plaque.
- Replies: 3
- Views: 2746
Madonna & Child Plaque.
Here's a model of the Madonna & Child. Size is 19"x17"x1", cut in spanish cedar. The finish is a light brown glaze. This model file and others are being offered from 2dto3d Studio, http://www.2dto3dstudio.com/ , free of charge. You will be required to register on the site to access the downloads. I'...
- Mon Aug 24, 2009 1:18 am
- Forum: Design & Make - Aspire
- Topic: Coat Rack using scene from new Wildlife D&C Series
- Replies: 21
- Views: 13805
Re: Coat Rack using scene from new Wildlife D&C Series
Tim....
Great looking job... I really like the added texture on the flat !!
Keep'm coming !!
Paul N
Great looking job... I really like the added texture on the flat !!
Keep'm coming !!
Paul N
- Fri Aug 14, 2009 4:10 pm
- Forum: VCarve - Gallery
- Topic: "Osage Orange" Project.
- Replies: 5
- Views: 3253
Re: "Osage Orange" Project.
Thanks guys for the kind words....
Tim::::
[b][size=150]Will Finish For Food !!![/size][/b]
Paul
Tim::::
[b][size=150]Will Finish For Food !!![/size][/b]
Paul
- Thu Aug 13, 2009 5:42 pm
- Forum: VCarve - Gallery
- Topic: "Osage Orange" Project.
- Replies: 5
- Views: 3253
"Osage Orange" Project.
For those who attended the AWFS this year, and went by the Vectric booth, might have seen the "Osage Orange" ( hedge ) project. But for those not making the show, you might be interested in seeing this project. This is V-Carve cut and then paint filled using a 'shimmer opaque gel'. The hedge has mul...
- Mon Aug 03, 2009 12:28 am
- Forum: Aspire - Tips and Tricks
- Topic: Glazing a carving
- Replies: 22
- Views: 11959
Re: Glazing a carving
Hey Tim....
Finely getting around to do another relief with a 'glaze' finish.
The first picture is off the table, ready for a bit of sanding.
The second picture is after using your 'glaze' steps...
C-ya in Oct...
Paul N
Finely getting around to do another relief with a 'glaze' finish.
The first picture is off the table, ready for a bit of sanding.
The second picture is after using your 'glaze' steps...
C-ya in Oct...
Paul N
- Sat Jul 04, 2009 3:36 am
- Forum: Aspire - General
- Topic: Need Basic How to Dish...
- Replies: 6
- Views: 3544
Re: Need Basic How to Dish...
Hey Andy....
Take a look at the attached screen.... I think you need to make sure
the object is set to the top. within your material...
Hope that helps !!
Paul
[attachment=0]dish.jpg[/attachment]
Take a look at the attached screen.... I think you need to make sure
the object is set to the top. within your material...
Hope that helps !!
Paul
[attachment=0]dish.jpg[/attachment]
- Thu Jun 18, 2009 9:48 pm
- Forum: VCarve - General
- Topic: Smooothing Bit Map pics
- Replies: 7
- Views: 4005
Re: Smooothing Bit Map pics
Gary....
A lot of what you are finding is the quality of your artwork.
Is it possible for you to upload the original file?
Paul
A lot of what you are finding is the quality of your artwork.
Is it possible for you to upload the original file?
Paul
- Fri May 29, 2009 12:10 pm
- Forum: Aspire - General
- Topic: South Carolina user meeting - October 2/3 2009
- Replies: 149
- Views: 51157
Re: South Caroline user meeting
Hello Jim....
I am interested in attending your planned camp, so please place me on your
"info" list.
I'm just north of 'Hot-lanta', so am about 4 hours away.
I am also open at this time, as to your planned dates.
Thanks for the offer !!
Paul N
I am interested in attending your planned camp, so please place me on your
"info" list.
I'm just north of 'Hot-lanta', so am about 4 hours away.
I am also open at this time, as to your planned dates.
Thanks for the offer !!
Paul N
- Tue Mar 24, 2009 3:43 pm
- Forum: Cut3D - Gallery
- Topic: Sliced Fox !!
- Replies: 8
- Views: 11494
Re: Sliced Fox !!
Hey Will.... (( thanks for helping out Tim )) Will, I think the video will answer most of your questions, if not please post another here... Only other thing I could say right now, is to start out with something rather simple, till you get the feel.... One last thing... If your thinking about a larg...
- Sat Dec 20, 2008 5:21 pm
- Forum: VCarve - Gallery
- Topic: Candle holder, Thank you Khalid
- Replies: 8
- Views: 5337
Re: Candle holder, Thank you Khalid
Thanks Grease.... I used "Devcon" 2-Ton Epoxy, which I've used on other corian projects, and it seems to work well.... Couple things I like about it, is it has about a 30 minute working time, plus I found it cleans up with denatured alcohol. The alcohol does not effect the corian.... Here is a web s...
- Sat Dec 20, 2008 3:16 pm
- Forum: VCarve - Gallery
- Topic: Candle holder, Thank you Khalid
- Replies: 8
- Views: 5337
Corian Candle Holder, Thanks to Khalid
Here is my first attempt at the candle holder, from Khalid..
This is cut from corian, with a few minor changes.
Paul N
This is cut from corian, with a few minor changes.
Paul N
- Thu Dec 18, 2008 5:36 pm
- Forum: VCarve - General
- Topic: What is everyone making for Christmas 2008
- Replies: 53
- Views: 20547
Re: What is everyone making for Christmas 2008
Kent.....
Great Job !!!
What is the frame made of, and finished with ??
Looks like the metal coat from Sculpt Nouveau.
Thanks for sharing !!
Paul N
Great Job !!!
What is the frame made of, and finished with ??
Looks like the metal coat from Sculpt Nouveau.
Thanks for sharing !!
Paul N
- Sat Dec 13, 2008 6:08 pm
- Forum: VCarve - General
- Topic: What is everyone making for Christmas 2008
- Replies: 53
- Views: 20547
Re: What is everyone making for Christmas 2008
Merry Christmas, All !!
This year the family will be getting either an oak book, or
a maple scroll plaque. The hands on the scroll plaque are
metal coated.
Aspire, was used to do the design work, and the 3D Vector
files, were thanks to Mr. Booth !!
Paul N
This year the family will be getting either an oak book, or
a maple scroll plaque. The hands on the scroll plaque are
metal coated.
Aspire, was used to do the design work, and the 3D Vector
files, were thanks to Mr. Booth !!
Paul N