Search found 7173 matches
- Sun Nov 19, 2023 3:32 pm
- Forum: VCarve - General
- Topic: What wood to use
- Replies: 19
- Views: 2456
Re: What wood to use
Thanks Scott, I did make these thicker than 1/2" which may have made a difference, they have certainly stood up well over time. I did do one for a friend with his Granddaughters name on it but I used a different font as I had read up on educational toys by then & used one of the suggested fonts. Sti...
- Sun Nov 19, 2023 2:01 pm
- Forum: VCarve - General
- Topic: What wood to use
- Replies: 19
- Views: 2456
Re: What wood to use
I made these a few years ago now & 2 of my Grandkids have played with them a lot, yes they have been chewed & launched across the room more than I care to think about :lol: :lol: They are beech just over 2" tall but they are just over 3/4" thick (20mm). The bases are Oak. The corners are slightly ro...
- Wed Nov 15, 2023 10:13 pm
- Forum: VCarve - General
- Topic: What wood to use
- Replies: 19
- Views: 2456
Re: What wood to use
I generally use Beech for this sort of thing, I also know that maple is a favoured wood by toy makers but the sawmill where I buy most of my wood doesn't often have maple, I guess it's not that abundant around the area I live :lol: :lol: Is this something that is going to be used as a teaching aid? ...
- Mon Nov 13, 2023 1:10 pm
- Forum: VCarve - General
- Topic: One open vector
- Replies: 13
- Views: 1295
Re: One open vector
Looks like your problem has been solved but something else worth remembering is that if vectors are grouped open vectors will not show so before using the tool to find open vectors you need to make sure they are not grouped
- Thu Nov 09, 2023 5:48 pm
- Forum: VCarve - General
- Topic: Smooth Semicircle
- Replies: 7
- Views: 960
Re: Smooth Semicircle
How are you drawing your semi-circles within Vcarve? I have tried a number of different ways & I haven't been able to reproduce what you have said when drawing semi-circles within the software :lol: :lol: Can you select bezier within Corel for creating your semi-circles rather than line segments, th...
- Thu Nov 09, 2023 1:41 pm
- Forum: Aspire - General
- Topic: Feature request for Job Setup Datum
- Replies: 4
- Views: 1227
Re: Feature request for Job Setup Datum
I normally set it as I create a new sheet but if I need to make changes then I use the sheets tab as Adrian has already mentioned.
The forum is mainly user to user, feature requests are better sent directly to Vectric where they keep a list of them
support@vectric.com
The forum is mainly user to user, feature requests are better sent directly to Vectric where they keep a list of them
support@vectric.com
- Wed Nov 08, 2023 8:36 pm
- Forum: VCarve - General
- Topic: Unable to get clean V Carved Text
- Replies: 17
- Views: 1685
Re: Unable to get clean V Carved Text
I would check the bit you are using, as adze_cnc has already said that looks to have been cut with a much larger v bit than 90 degree if it were cut with a V bit at all
How are you setting your z zero?
How are you setting your z zero?
- Sun Nov 05, 2023 4:13 pm
- Forum: VCarve - General
- Topic: Cutting 1/4" plexiglass
- Replies: 17
- Views: 3923
Re: Cutting 1/4" plexiglass
I didn't intend to complicate things. In my experience, if the acrylic is paper covered, it's generally cast. If it is plastic covered, it is generally extruded. Others may have different experinces, though. Certainly different in the UK, all the brands of cast acrylic & polycarbonate I have used o...
- Sun Nov 05, 2023 2:21 pm
- Forum: VCarve - Tips and Tricks
- Topic: Possibility of adjusting origin position
- Replies: 5
- Views: 1576
Re: Possibility of adjusting origin position
Not sure I understand either :oops: :oops: This is where either the file or screenshots come in handy. Can't you simply go back into job set up & change the size of your stock if you have cut your stock material to short? You would then need to recalculate all toolpaths. If you wanted to keep the or...
- Sun Nov 05, 2023 11:16 am
- Forum: Aspire - General
- Topic: mach 3 single key press to start
- Replies: 3
- Views: 1202
Re: mach 3 single key press to start
What screenset are you using with mach3 & does it have a park position? I was thinking if the machine was set up correctly then it would cut the material & then move to the park position, you remove the piece of flooring & insert a new one & then press cycle start again.
- Sun Nov 05, 2023 11:11 am
- Forum: VCarve - General
- Topic: 2.5 model on 1.5” material endmill recommendations
- Replies: 5
- Views: 700
Re: 2.5 model on 1.5” material endmill recommendations
As Randall says any tool with a long enough CEL, the other thing to be aware of with an extended length bit is that there is more chance of tool deflection so you need to adjust your speed & feed settings accordingly
- Sun Nov 05, 2023 2:43 am
- Forum: VCarve - General
- Topic: Poor vcarve results
- Replies: 2
- Views: 431
Re: Poor vcarve results
If you can't post the file then screenshots would be the next best option but more info would be required, material your cutting, is it a V bit or an engraving bit? Settings for the bit from the tool database more info on the bit you are using, are you using a clearance bit at all. how are you setti...
- Sat Nov 04, 2023 4:03 pm
- Forum: VCarve - General
- Topic: Cutting 1/4" plexiglass
- Replies: 17
- Views: 3923
Re: Cutting 1/4" plexiglass
If it is melting then you are probably running the spindle to fast, feeding to slowly or a combination of the 2, plastics are less forgiving than wood so dialing in your speed & feed setting is more critical :lol: :lol: If you read what adze_cnc posted then those figures worked well for him with his...
- Sat Nov 04, 2023 3:50 pm
- Forum: Aspire - General
- Topic: mach 3 single key press to start
- Replies: 3
- Views: 1202
Re: mach 3 single key press to start
What would you use this for? If you have made a Vice that is fitted on your spoilboard & set things up correctly then it seems all you really need to do once the g-code has been uploaded to mach3 is to just hit cycle start everytime you switch out the piece of flooring :lol: :lol: Although this migh...
- Sat Nov 04, 2023 3:43 pm
- Forum: Aspire - General
- Topic: Amana 46054 Endmill Feed Rate
- Replies: 5
- Views: 1154
Re: Amana 46054 Endmill Feed Rate
If you want to be able to cut at the best speed for your machine you are going to have to do some testing. Good thing about the Vectric software is that it now gives you the chip load based on the Bit you are using. If you know the chip load from chip load tables then you can play around with the sp...