Search found 5626 matches
- Sun Feb 25, 2024 5:17 pm
- Forum: Aspire - General
- Topic: Maximum Job Size Aspire?
- Replies: 6
- Views: 480
Re: Maximum Job Size Aspire?
How big do you need? You are limited to working in inches or millimeters. I just tried it with a work area of 100,000 X, 100,000 Y, and 100,000 Z inches and it was fine.That is a job size of roughly 4 cubic miles. When I tried 1 billion X, 1 billion Y, and 1 billion Z inches and began drawing it sho...
- Sun Feb 25, 2024 3:34 am
- Forum: VCarve - General
- Topic: EVA Foam Seadeck Settings
- Replies: 2
- Views: 329
Re: EVA Foam Seadeck Settings
Contact Onsrud. They make bits designed for foam cutting. They can provide you with recommended bits, feeds and speeds.
There are a number of tutorials on YouTube: EVA Foam CNC
Do you plan on using double-sided tape to hold the material?
There are a number of tutorials on YouTube: EVA Foam CNC
Do you plan on using double-sided tape to hold the material?
- Sun Feb 25, 2024 1:19 am
- Forum: Aspire - General
- Topic: Is there a way to do this
- Replies: 41
- Views: 2428
Re: Is there a way to do this
If any one has any advice on how I could get started on something like this I sure could use your advice. There is an old saying: Q: How do you eat an elephant? A: One bite at a time. how-to-eat-elephant_thumb1.png Let's break the project into sections: Capital Shaft Base column_psf6662996286580935...
- Sat Feb 24, 2024 2:25 am
- Forum: Aspire - General
- Topic: A Rotary 4th Axis disaster... I am very discouraged here
- Replies: 42
- Views: 1749
Re: A ROTARY 4TH AXIS DISASTER... I AM VERY DISCOURAGED HERE
Can you post a photo of the ruined piece?it ruined my square wood is all that happened... what am i doing wrong?
That would help in the discussion.
- Sat Feb 24, 2024 1:36 am
- Forum: VCarve - General
- Topic: Pocket toolpath allowance
- Replies: 4
- Views: 325
Re: Pocket toolpath allowance
Even after using the software for years I still do this to refresh my memory on how something works.set a much larger value, give it a go, and then check the size on the preview by moving your cursor around.
Quick, Easy, Reliable.
- Fri Feb 23, 2024 6:14 pm
- Forum: Gadgets - Releases
- Topic: Nesting!! Can we do something about it?
- Replies: 22
- Views: 12134
Re: Nesting!! Can we do something about it?
There is an open source nesting program (free) that might be worth looking into: DeepNest It is particularly suited for laser work, but should work with router CNC as well. From their web page: Automatic line merging Deepnest packs your parts into a compact area to save material and time. It automat...
- Thu Feb 22, 2024 6:34 pm
- Forum: Aspire - General
- Topic: V12 for Mac Silicon, please?
- Replies: 36
- Views: 2300
Re: V12 for Mac Silicon, please?
I used it for years with no problems. You do need Windows Pro or Enterprise since the Home version does not support RDP.I've never really used RDP, but might give it a try.
- Thu Feb 22, 2024 5:38 pm
- Forum: VCarve - General
- Topic: Brand new downcut bit causing jagged edges?
- Replies: 1
- Views: 232
Re: Brand new downcut bit causing jagged edges?
The jagged edges are referred to as chatter From the CNC Cookbook Chatter is a resonant vibration in the cutting tool (called tool chatter) or the workpiece (called workpiece chatter). It can become quite violent and generate a distinctive loud noise. In addition, chatter will leave distinctive Chat...
- Tue Feb 20, 2024 6:07 pm
- Forum: Aspire - General
- Topic: V12 for Mac Silicon, please?
- Replies: 36
- Views: 2300
Re: V12 for Mac Silicon, please?
Short answer: You won't see native MacOS support until Vectric switches to a software development framework that supports multiple OS development. Changing to a new framework is a lot of work. Long explanation about software development frameworks: A software development framework is a structured s...
- Tue Feb 20, 2024 5:32 pm
- Forum: VCarve - General
- Topic: Upgrading laptops, using same software
- Replies: 1
- Views: 288
Re: Upgrading laptops, using same software
From the FAQ: Vectric's license allows any of our software programs to be installed on up to 3 PC's for a single user. If access to any one of the computers is shared with work colleagues, or anyone who is likely to access the software, then the software must only be installed onto one computer. We...
- Tue Feb 20, 2024 12:32 am
- Forum: Aspire - Tips and Tricks
- Topic: Any AI masterpieces ?
- Replies: 32
- Views: 3814
Re: Any AI masterpieces ?
Most of the image creators will reject requests with trademarks, trademarked characters, and living people.
- Mon Feb 19, 2024 2:24 am
- Forum: Aspire - General
- Topic: Sample Rotary Project
- Replies: 1
- Views: 360
Re: Sample Rotary Project
See if this one works with the trial version: Barley Twist Table
- Sat Feb 17, 2024 10:33 pm
- Forum: Aspire - General
- Topic: Training Recommendations
- Replies: 13
- Views: 1072
Re: Training Recommendations
I recommend Mark Lindsay's videos on YouTube. He starts with the very basics and goes through advanced concepts. You can pick and choose the topics of the various videos. I'm sure he will add V12 specific content soon after it is released. I also recommend Michael Mezalick's 3D modeling videos. All ...
- Sat Feb 17, 2024 5:30 pm
- Forum: Aspire - General
- Topic: V12 in April
- Replies: 4
- Views: 979
Re: V12 in April
From the FAQ : Am I entitled to free upgrades? Minor updates are always free to anyone who has the same major version (e.g V11.5 will be free to all owners of V11.0 software). Any major version of the software released within 12 months of you purchasing the software is supplied free of charge and av...
- Fri Feb 16, 2024 5:30 pm
- Forum: Aspire - General
- Topic: Do these AI gadgets have humor?
- Replies: 11
- Views: 1041
Re: Do these AI gadgets have humor?
This was the prompt I gave to firefly.adobe.com Draw a black and white image of a Sheltie dog using the Scherenschnitt old folk art style from Germany and Switzerland And here is the response: Screenshot 2024-02-16 082230.png From bing image creator : Screenshot 2024-02-16 082521.png From Google's I...