Thanks once again Adrian..... Not such a problem after all
I do not know why it as taken me such a long time to discover this feature.
Soapy
Search found 375 matches
- Sat Sep 17, 2022 5:17 pm
- Forum: Aspire - General
- Topic: Tinting Lines in a Vectric Drawing
- Replies: 3
- Views: 773
- Sat Sep 17, 2022 3:11 pm
- Forum: Aspire - General
- Topic: Tinting Lines in a Vectric Drawing
- Replies: 3
- Views: 773
Re: Tinting Lines in a Vectric Drawing
Thanks Adrian,
Thanks for your very speedy reply..... From what you write it is quite obvious that what I need can be done.
At the moment I am more than a little unsure how I go about this.... but I am going to find out
For a starter ...... Is there a tutorial on the subject?
Soapy
Thanks for your very speedy reply..... From what you write it is quite obvious that what I need can be done.
At the moment I am more than a little unsure how I go about this.... but I am going to find out
For a starter ...... Is there a tutorial on the subject?
Soapy
- Sat Sep 17, 2022 2:42 pm
- Forum: Aspire - General
- Topic: Tinting Lines in a Vectric Drawing
- Replies: 3
- Views: 773
Tinting Lines in a Vectric Drawing
Hi Everybody. I must say that I really enjoyed the UK User Group Meeting It was quite obvious to me that a lot of work had gone into its preparation and it showed! My request is possibly quite unusual .... How could I tint, in different colours, the various components within a Vectric Drawing. One v...
- Fri Sep 09, 2022 10:24 pm
- Forum: Aspire - General
- Topic: Is the Group Meeting Planned for next Tuesday Still on?
- Replies: 1
- Views: 830
Is the Group Meeting Planned for next Tuesday Still on?
HI
Quite a number of organisations are cancelling, out of respect for the death of Queen Elizabeth, their meetings
Is there any possibility that the above meeting will be cancelled?
Soapy
Quite a number of organisations are cancelling, out of respect for the death of Queen Elizabeth, their meetings
Is there any possibility that the above meeting will be cancelled?
Soapy
- Tue Aug 23, 2022 11:17 am
- Forum: Aspire - General
- Topic: August Newsletter
- Replies: 3
- Views: 762
Re: August Newsletter
Thanks Adrian,
With your kind help it now works fine.
Personally, in the future I can use these added "notes" to great advantage.
On my copy of Beki's "Top Tip" I am sure she quotes *.*
Or do I need to go to the opticians?
Soapy
With your kind help it now works fine.
Personally, in the future I can use these added "notes" to great advantage.
On my copy of Beki's "Top Tip" I am sure she quotes *.*
Or do I need to go to the opticians?
Soapy
- Tue Aug 23, 2022 10:28 am
- Forum: Aspire - General
- Topic: August Newsletter
- Replies: 3
- Views: 762
August Newsletter
Hi,
I have just attempted to use the "Top Tip" that Beki kindly informs us about in the above newsletter.... Adding "NOTES" to a file
I start the note with *.* but nothing happens after saving the file and reopening
I am using Aspire 10.515
What am I doing wrong?
Soapy
I have just attempted to use the "Top Tip" that Beki kindly informs us about in the above newsletter.... Adding "NOTES" to a file
I start the note with *.* but nothing happens after saving the file and reopening
I am using Aspire 10.515
What am I doing wrong?
Soapy
- Tue Aug 09, 2022 5:23 pm
- Forum: Aspire - General
- Topic: Chamfer Gadget in Version 10.515
- Replies: 4
- Views: 943
Re: Chamfer Gadget in Version 10.515
Hi Scottanor, I use both the chamfer gadget and the chamfer in the Toolpath Options .... If the gadget worked well in version 10 I would expect it to work in version 10.515 I see no reason to add it to version 10.515 if it does not work on my machine One reason why I use the gadget version is that I...
- Tue Aug 09, 2022 5:09 pm
- Forum: Aspire - General
- Topic: Chamfer Gadget in Version 10.515
- Replies: 4
- Views: 943
Re: Chamfer Gadget in Version 10.515
As requested
- Tue Aug 09, 2022 1:14 pm
- Forum: Aspire - General
- Topic: Chamfer Gadget in Version 10.515
- Replies: 4
- Views: 943
Chamfer Gadget in Version 10.515
Hi, I have noticed that if I attempt to use the Chamfer gadget in this version (10.515) it does not work correctly,,, However, if I us it in version 10 it is quite O.K. Typically, in version 10,515, if I attempt to chamfer, at 45degrees, the edges around a square I get a chamfered square with a addi...
- Tue Mar 08, 2022 12:12 pm
- Forum: Aspire - General
- Topic: Respacing Objects along a line
- Replies: 1
- Views: 759
Re: Respacing Objects along a line
Hi Everybody
After floundering around for a while I found a solution
Array Copy
Soapy
After floundering around for a while I found a solution
Array Copy
Soapy
- Tue Mar 08, 2022 10:07 am
- Forum: Aspire - General
- Topic: Respacing Objects along a line
- Replies: 1
- Views: 759
Respacing Objects along a line
Hi Everybody,
Just a quickie for the "experts"
I am doing a drawing with a lot of holes spaced along the x axis.....
At the moment they are 3mm holes spaced 4.6mm apart ..... I want to open this up to 3mm holes spaced 5mm apart
Is there a quick way to do this ?
Soapy
Just a quickie for the "experts"
I am doing a drawing with a lot of holes spaced along the x axis.....
At the moment they are 3mm holes spaced 4.6mm apart ..... I want to open this up to 3mm holes spaced 5mm apart
Is there a quick way to do this ?
Soapy
- Fri Feb 18, 2022 6:49 pm
- Forum: Aspire - General
- Topic: Why is the time incorrect on this website?
- Replies: 4
- Views: 1412
Re: Why is the time incorrect on this website?
Thanks everybody.... Great once I had found where to alter it!
Soapy
Soapy
- Fri Feb 18, 2022 4:52 pm
- Forum: Aspire - General
- Topic: Prototype CNC Machine
- Replies: 12
- Views: 2737
Re: Prototype CNC Machine
Thanks BDM.... I very seriously considered your approach and I must say it has its merits. I have changed direction since my very first idea ... originally I was thinking about just a 2 axis machine built to cut "kerfs" along the length of shaped plywood .... so I purchased a few bits and bobs .... ...
- Fri Feb 18, 2022 12:38 pm
- Forum: Aspire - General
- Topic: Prototype CNC Machine
- Replies: 12
- Views: 2737
Re: Prototype CNC Machine
Hi Martin. Interesting question ..... I have a German build CNC that I normally use .... a sturdy machine that will do anything that I normally require. However, sometime ago I thought of making a very simple CNC myself and decided, after a lot of consideration, to make a small table top machine ......
- Fri Feb 18, 2022 9:52 am
- Forum: Aspire - General
- Topic: Prototype CNC Machine
- Replies: 12
- Views: 2737
Re: Prototype CNC Machine
Hi Martin, I am planning to use the TB6600 Stepper Motion Driver/Controller paired up with NEMA 17 motors. I have not , as yet decided what to marry up with my Arduino ... but, at the moment, I am looking at the CNC Shied A4988 DRV8825 Most of these components are quite inexpensive .... so I feel I ...