Vectric Customer

Work in progress... should be up to the resin pour this weekend... just need to do the splines.

Ideas on feet ?

Here are the scenes

Hi All,

I would like to blend 2 scenes together, can someone point me to any tutorials that could help me with this.
I am starting to play around with the sculpting tools.... lots to learn, the big problem I see is the different model heights where the two scenes join.

Thanks as always
Ron

Hi all,

When do you add base height ?
Purpose and amount ?

Ron

I finally was able, after lots and lots of testing, to get my Zank V-Inlay parameters down pat and have had great success. Here are a few recent cutting boards I've done using Zank. They are all approximately 15" x 11" x 1 1/4". Very nice indeed.... I have found also using a press does make a big d...

gkas wrote: ↑

Thu Jan 14, 2021 8:35 am

Rounding errors. The calculations are based on the pixel size of the project.

Thank you for the explanation

Hi All,

I want to resize a DM model to 456 x 326 mm

When I use the set size Drawing tool I end up with
Why is it so ?

Thanks
Ron

I only open the maze DXF in VCarve to confirm dimensions and such. I directly run the TAP file that the Mazemaker software generates. I've never worried about setting up the tools, but if I did, I would set it up as an End Mill. The main point to remember is that the channel path plunges at the ent...

Adrian wrote: ↑

Mon Jan 11, 2021 9:17 am

I'd add it as a round nose bit. You can't create a form tool with an undercut (which a full ball bit is) so you would need to create a form tool that looked like a round nose bit anyway.

Thank you Adrian

I would like to do a maze using MazeMaker from Tailmaker
When adding the ball bit to the Tool Database do I enter it as an EM? or a form tool?

Thanks
Ron

Looks great.
Love the V Carve in the lid.... will copy your idea and gold resin fill

Very nice indeed... will add it to my project list

My thoughts are that your material is not square to XY.
For a test I would use an oversize piece of material. do a full depth profile cut around the material to square it up, then measure the center point of the material, set X0 Y0 and cut your groove.

Why ? because I have never made one...
18"Dia
River Redgum with resin fill max depth 2.5mm

Now onto my next project

Hi Todd,
Have a problem editing...
How do I reduced the green side to match the red?
Thanks
Ron