Search found 907 matches

by sharkcutup
Tue Nov 24, 2020 4:20 pm
Forum: VCarve - General
Topic: box joint creator
Replies: 11
Views: 432

Re: box joint creator

Do you still want both the top and the shelf which holds the bottle in place to be able to slide in and out of the box?

Sharkcutup
by sharkcutup
Tue Nov 24, 2020 4:17 pm
Forum: VCarve - General
Topic: V10.5
Replies: 12
Views: 436

Re: V10.5

Sometimes when upgrading the post processors do not always follow in the same order from one version to the next. Was just asking if you made sure that the same post processor was used when you saved the files from version 9 to 10.

Sharkcutup
by sharkcutup
Mon Nov 23, 2020 11:52 pm
Forum: VCarve - General
Topic: box joint creator
Replies: 11
Views: 432

Re: box joint creator

Screenshot 2020-11-23 163334.png
Screenshot 2020-11-23 163520.png
Something Like This??? Made this big enough to hold a few glasses too!

Sharkcutup
by sharkcutup
Mon Nov 23, 2020 11:38 pm
Forum: VCarve - General
Topic: V10.5
Replies: 12
Views: 436

Re: V10.5

When you went from 10 to 10.5 and saved the g-code did you use the correct post processor?

Sharkcutup
by sharkcutup
Mon Nov 23, 2020 6:22 pm
Forum: VCarve - General
Topic: box joint creator
Replies: 11
Views: 432

Re: box joint creator

Would you want the box big enough to hold a couple of glasses too???

Sharkcutup
by sharkcutup
Mon Nov 23, 2020 3:52 am
Forum: VCarve - General
Topic: Level Clipping
Replies: 4
Views: 110

Re: Level Clipping

+1 agree

New feature in version 10

Sharkcutup
by sharkcutup
Mon Nov 23, 2020 12:30 am
Forum: VCarve - General
Topic: Does anyone do Freelance work?
Replies: 10
Views: 492

Re: Does anyone do Freelance work?

Hi Sharkcutup/Martin54 Thanks for your replies. Yes I agree, I have been working with the software again today and it's actually quite intuitive when used alongside the tutorials. Sharkcutup - That's pretty much the type of thing I would like to make :D Could you advise on a few things please if yo...
by sharkcutup
Sun Nov 22, 2020 6:32 pm
Forum: VCarve - General
Topic: One way tool path?
Replies: 10
Views: 144

Re: One way tool path?

I do not get any overlaps!
Caymas4 - final production_drawing_Piece 1.dxf
(65.39 KiB) Downloaded 2 times
Here is your file back with all closed vectors.

Sharkcutup
by sharkcutup
Sun Nov 22, 2020 5:54 pm
Forum: VCarve - General
Topic: One way tool path?
Replies: 10
Views: 144

Re: One way tool path?

+1 Agreed

If you close all vectors ---- No Problem!

Sharkcutup
by sharkcutup
Sun Nov 22, 2020 12:52 am
Forum: VCarve - General
Topic: trinacria project
Replies: 7
Views: 238

Re: trinacria project

Good Luck!!!

And be sure to post your end results here sure would like to see how that bowtie looks!!!!

SHARKCUTUP
by sharkcutup
Sat Nov 21, 2020 11:27 pm
Forum: VCarve - General
Topic: V-carve with flat depth
Replies: 11
Views: 280

Re: V-carve with flat depth

Yup! I identified another useful tool to see just how a toolpath is software designed to operate. And of course verifying it is the toolpath I am looking/wanting to use.

Sharkcutup
by sharkcutup
Sat Nov 21, 2020 10:05 pm
Forum: VCarve - General
Topic: setting z axis
Replies: 8
Views: 149

Re: setting z axis

sorry I just thought of something. I'm not aware that you could change the thickness of the touch plate In Earlier Versions of the shark it is located in the preferences of the control panel. It is a one-time setting and over time most forget about it until they get a new touch plate which is diffe...
by sharkcutup
Sat Nov 21, 2020 9:27 pm
Forum: VCarve - General
Topic: setting z axis
Replies: 8
Views: 149

Re: setting z axis

Okay Where are you placing the calculation plate (touch-off plate)? Top of material or machine bed?

Also have you checked to see if somehow the thickness setting for the calculation plate (touch-off plate) may have changed?

Sharkcutup
by sharkcutup
Sat Nov 21, 2020 9:10 pm
Forum: VCarve - General
Topic: trinacria project
Replies: 7
Views: 238

Re: trinacria project

Okay this is what I have tried! A lot of work on cleaning up vectors after using the trace bitmap tool. Screenshot 2020-11-21 140517.png Traced at Approx. 24" Screenshot 2020-11-21 140756.png Scaled Down to 1.0" (Zoomed in to show clarity) Not sure how well something that small will look after carvi...
by sharkcutup
Sat Nov 21, 2020 9:00 pm
Forum: VCarve - General
Topic: setting z axis
Replies: 8
Views: 149

Re: setting z axis

Did you make change to your carving program, re-calculate your toolpaths for the changes made and saved them with the correct post processor for machine use? Or Is a the same .tap file you have used over and over again maybe a 1000 times? Could it be corrupt? Have you tried saving the toolpath file ...