Vectric Customer

trying to make sign with a arrowhead model does anybody know where I can get a 3d model
Thanks

Do you use ultra lite mdf or regular mdf for photo carving, or would maple be better?

Where can you buy foam coat

I was hoping there would be a way to remove the letters without cutting the posts we'll get a lift today so we can see them
Thanks

Hi, I have to remove a sign from a brick buiding and move it to another location Does any body know how to remove the anchers or post that is holding it away from the brick wall?

I wanted to upgrade from 4.5 to 8.5 but can't find a upgrade page on the website.
Does anybody know what the address is ?

I saw a post about a vac table using motors from lighthouse, I was just wondering if 2 shopvacs would have as much suction as 1 of the motors.
The motors are $140 and the 5hp shopvacs are on sale for $40 I might buy 2 or 3 shopvacs if it would work.

I thought there was a tutorial on text on text but can't find it does anybody know where it is?

I was wondering if is worth $400 for the Aspire 8 upgrade.I have 4.5 now and was considering upgrading but didn't know if it was much different than what I already have.Might wait until the next version if it
Thanks for any advice.

Cutting those on the cnc is slow, it takes about 22min per side, I cut the blocks and flat section on the table saw and screw them on to the pedestal When the pedestal is cut on the cnc it needs almost no sanding and while it is being cut I can get the table top finished, so it saves me a lot of time.

I make tables similar to that, the blocks on the top and bottom are done seperate on the table saw and router table because they are not router bit profiles and would have to be carved if done on the cnc. I use the indexer to make these and edit the code so it will cut the first side then rotate and...

thanks

Does anybody know what font this is or know of a way to copy it?
I have tried to trace it and it looks horrible, A font that is close will work.
Thanks.

sorry, thought it was aspire
im not sure how to do tapers in vcarve

to do a taper leg use the 2 rail sweep and draw a vector at the end of thew leg and another where the taper starts-those 2 vectors will be the rails then draw an angled line for the profile.
The 2 rail sweep is explained in manual in the help section there are also tutorials on it